Discussion Locked

Computer keeps giving stop errors of all kinds

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am trying to fix this desktop computer for a friend. Originally it kept randomly restarting every 5-10 minutes. I tested all the expansion cards, RAM, hard drive, and power supply. All are working perfect in other machines. Tried reformatting and reinstalling Windows, however it would give a stop error at one point or another during the installation process. Always a different stop error. So I put another CPU I had into it and it installed windows fine no problem, and ran perfectly for hours. Then when I'm finishing up installing drivers it restarts again. Long story short the only thing I haven't tested is the motherboard. Does this sound right? Ive never dealt with a machine that has had a motherboard fail. This is a custom built machine. P4 processor, media center PC. Also tried swapping in new hard drives, new sticks of RAM, multiple times. Any input appreciated. Checked all bios settings as well. And live OS cds dont want to work either.

13 replies

by seanferd

Touch not the motherboard.

But, really, the actual errors would be of immense use to you . Look them up. That is why they are there.

by santeewelding

So's you don't land in the same trouble Chad does with his, "real".

Who knows. Maybe our petitioner is as sensitive to being as to the motherboard.

by jbbauer44

Oh I did look up the stop errors every time. The thing thats weird is they were always different, and a lot said they had to do with drivers. However, they were coming up during the installation of XP SP3, and some of the stop errors were patched in SP2.

by jaytrain40

Are you able to read even log details after this occurs? Sometimes those logs provide more information to you than the stop error would.

by seanferd

As well as the installation log.

The point about looking up the errors, though, was that we don't know what they are, so it is unlikely we could suggest anything specific. But since you report they are all driver errors, it certainly could be the mobo.

Before you reinstalled, though, did you wipe the drive - not just reformat, but wipe with something like DBAN or Killdisk. Could just be corrupt data on the drive, or even a drive with a corrupt region that just happens to be where the drivers are being installed. Could also be one bad piece of expansion hardware, depending on the driver errors. But seeing as how live cds won't work, it would certainly seem to be a hardware issue.

Mobos go bad all the time.

by nicknielsen

This is, in fact, the primary problem I have with the register PCs in my stores. With only one exception (power supply), every hardware-related register failure in the past year has been for fat or bleeding caps on the mobo.

by jbbauer44

I did not wipe the drive, however I tried installing on another hard drive which I formatted and it still wouldnt work.

by jbbauer44

Well after I put the new processor in and it crashed without going to a BSOD I checked the event logs. It said it was restarting because of ATI CCC. So I took out the graphics card uninstalled the drivers and software, and hooked the monitor up to the onboard video. That worked for about 20 minutes then it crashed without going to the BSOD again, and left nothing in the event log.

by seanferd

I can't think of anything else which could cause that, unless the PSU is has some wildly fluctuating output.

by jbbauer44

Have you replaced bad motherboards without fat or bleeding caps? This board appears to be fine.

by jbbauer44

I just want to be certain, thats why I came here for others opinions. I am going to try all the components on a new motherboard and do some stress testing. The power supply is fine, I checked it with a multimeter and monitored it for a while, no major fluctuations, and it was actually giving out 11.5-12.3 volts most the time.

by nicknielsen

They can fail either at the top or the bottom. If they fail at the bottom, they may not have swelled at the top, but they usually swell before they fail.

I use two different ways to check for swelling caps:
1. Run your finger over the tops of the electrolytic capacitors. (These are the ones that look like cans.) The tops of the capacitors should be slightly concave. You should be able to distinctly feel the edge of the ring around the top, with no part of the tops protruding.
2. Shine a light at the tops of the cans; you should see a focused reflection.

In both cases, if the capacitor has been overheated and is 'fat', it has most likely changed value or failed outright. Here are some pictures of bad electrolytic capacitors. http://www.badcaps.net/pages.php?vid=5

This discussion is closed to new replies.