Discussion Locked

Computer monitor; on again off again

0 helpful
15 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
On my sister-in-law's Gateway, her monitor keeps going blank, which I initially diagnosed as a problem with the monitor. However, after switching out the monitor and the cable with another monitor and cable, the same problem is occurring on the second monitor. The computer is running Win98. Could this be a power-related thing or another hardware-related problem such as the video card?

15 replies

by admin-stuart

Does the monitor in question behave the same when attached to another PC/video card? If not, I would begin by checking the video card function by trading out with another one to see if it fixes the problem. Also, try the suspect video card in another PC to doublecheck. If the video card doesn't show problems in the above procedures, you'll have to move on to the memory and motherboard as possible culprits. Good luck.

by ghetto_punk

1st - check your video card hook up inside the computer.
2nd - unplug and then replug the power cord for the monitor.

if it works when u plug the power cord in, u may have to get a new power cord for your monitor

by jereg

I'm not sure I know enough details to provide a good answer, but could it be the power management settings in Windows? That would cause the screen to "go blank".
Hope that helps.

by pchlp

I had this problem and it turned out to be the power management feature that was build into the monitor. Turn it off.

by diskaus

if you try another video card , if you are using a PCI video card try an ISA videocard ( or the otherway around) that way it rules out the pci slot or isa lot posibility of the problem being just in that slot , it is also best that yioul have your video card pluged in as far away from the power supply and the ram as your motherboard will permit .
see how you go with that, best of luck :-)))

by tjc

Is it when no one touches the mouse or keyboard for a while?
When you move the mouse does the monitor come back on?

If it does then it is either an internal powersave feature of the monitor (don't you just love energy star compilant featues) or you have some other power management screen saver features turned on.

This discussion is closed to new replies.