Questions to be answered, other things clarified. My comments will be listed between these ================
QUOTE: My home Windows Vista OS computer (HP) decided to not play nicely the other day by not initializing to the start window. I tried running diagnostics,
=====================
"What" diagnostics? Did you try the ones built in to Vista?
=====================
but no fruitful options.
My backup is a few weeks old and I wanted to recover some files from the HD before returning it to the store for repair under warranty.
=========================
I assume then that your backup is on a different Hard Drive and that the one you wish to recover the files from and that is the Hard Drive described in the following?
=========================
I purchased a Cables Unlimited USB2.0/eSATA Desktop HDD Dock.
I inserted my WDC WD6400AAKS-65A7B SCSI Hard Drive
=======================
This drive is a SATA not SCSI.
=======================
and it appeared in the Explorer window
=======================
What is the operating system of this computer your dock is plugged into? XP? Vista? WIndows 7?
=======================
as my "F:" Drive. BUT, when I click on it, it tells me that it isn't formatted.
=======================
If that is the exact message it returned in any of the above-mentioned Operating Systems, unless the data you wish to retrieve is really special -and you have no concerns about the monetary costs to recover said files- you are probably better off sending it on back to the store because it doesn't sound good at this juncture. If, on the other hand, that is NOT the exact message, or you can't be sure that's what it was, but to the best of your recollection it was something like that, then plug it back in and write the exact message down and relate it back to us.
========================
I'm guessing that because it belonged to another computer, partitioning, etc, blah, blah, that it isn't "plug/play".
========================
You get 1/2 point for a "possible" here. It has nothing to do with another computer, nor plug and play. Could be partitioning and if it is I refer to my previous comment, UNLESS you wish to try your hand at a program called testdisk (google it) and use at your own risk. BUT FINISH READING THIS ENTIRE POST FIRST! Especially the comment immediately following this one as it should be attempted before this in my opinion.
===========================
My question is: What can I do so that I can see the file directories?
===========================
You said earlier that this was from an HP computer. Put the drive back in that computer, boot to get to setup in the BIOS. Almost all late model HP's have a hard drive testing function in the BIOS. Use that to make a reasonable assumption as to the health of that drive. If it tests out bad, then send the whole unit back for warranty. Not the answer you wanted to hear? You "might" be able to recover some of the data off it yet if you wish to try. My suggestion would be to download GetDataBack for NTFS, plug the drive back into the dock on the other computer and GetDataBack will scan it for possibilities and even allow you to see what files it can recover before purchasing it.
=========================
I confess that I attempted to put jacks on 2 of the 5 sets of pins to make it a slave drive. Problem was that I didn't have jacks and I attempted a home version of foil. I don't know if my theory was flawed or my home jacks just weren't successful.
==============================
This is a brave confession and my hat goes off to you for your courage in admitting it. As a matter of fact, it is your candor here which prompts me to write this small novel. That said, in this day and age it is way too easy to google virtually anything regarding computers, their usage and repair to make mistakes like this. Your biggest mistake here was not the use of foil in lieu of jumpers. Rather, it was the notion that you could use jumpers in an arbitrary fashion without risking catastrophic results. Though not likely to prove catastrophic in the case of HD jumpers, there are other areas it definitely will prove that way. SATA drives (as stated in an earlier post) need no jumpers to work. The pins you mention, those of which you unsuccessfully tried to jump with foil, are there for but one purpose. That being to limit the i/o speed of the drive in order to maintain compatability with older equipment.
Good luck to you in this endeavor. Should you have any further questions, submit them and someone will answer them. And do post back with the outcome of your efforts.
Edited to separate my comments from original posters'