Discussion Locked
0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I are trying to connect a winpro computer to another winpro computer via an ethernet connection without using the internet. I created a workgroup on both computers but they wont communicate with each other. Any suggestions?
2 replies
by abu_danny
Hi,
I assume you have them both on the same IP network and subnet. You will need to make sure that if you are connecting one PC to another with no hub in between, you are using a Cross Over cable, if you are using a hub or switc than use Staight cable.
Too often, cabling is the problem.
You can also add NetBeui into your protocols, it would make it faster.
Hope this helps
by jwnavarro
I don't have both systems on IP network or subnet. I have no hub.
I will add NetBui.
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending
2 helpful
25 replies
Discussion
Do you think that business directories are relevant to Local SEO And Lead Generation today
0 helpful
16 replies
0 helpful
6 replies
0 helpful
12 replies
1 helpful
9 replies