Discussion Locked

Computers keep disappearing from network

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a home network linking 3 desktops and 2 notebooks, each running Windows 98SE. They are connected through a LinkSys broadband router, plus two step-up hubs.

At various times, all computers on the network can see all computers...and at other times (like now) all desktops can see only one laptop. Which computers are visible to which other computers when seems to change on a random basis.

I have done numerous Knowledge Base searches, tried the networking Wizard (which just points me to the network administrator, who unfortunately is me), looked in books and manuals, even hired a consultant to no avail. I am not a network person, just a small-business owner (and pretty savvy software end user). Can anyone point me in the direction of solving my problem?

8 replies

by mckaytech

When you say "all desktops can see only one laptop" do you mean in Network Neighborhood? What happens when you go to a command prompt and type 'net view'?

If the workstations are all listed by 'net view', then there is a problem with the workstations agreeing on who is going to be the browser server. I'm not sure what the best workaround would be, but if you're running only TCP/IP you may want to add an LMHOSTS file to each workstation and see if that stabilizes the situation.

To createan LMHOSTS file, use the sample template LMHOSTS.SAM in the c:\windows directory, make the necessary changes and save it without a file extension.

paul

by nettek

Without using NetBEUI as a protocol, or having the benefit of a WINS server, you will always have intermittent browsing problems. You can go the route of Answer 1, and add LMHOSTS files to each computer. Or, you can try the following:
1. Go to Start -> Find -> Computers. Input the name of a PC that is missing from Network Neighborhood.
2. Once it is found, open up Network Neighborhood.
3. Drag the missing computer from the Find window into Network Neighborhood. You will be prompted to create a shorcut.
4. Repeat this for all missing PCs on all your machines.
5. The shortcuts will remain after reboot.

The only odd thing about this is that on occasion you will see both the shortcut to a computer, and the computer itself, in Network Neighborhood. But at least they'll always be there.

Hope that helps.

by cwright2000

Gave me the idea to install NetBEUI as a protocol, which seems to have solved the problem! so this answer helped indirectly. The "find computers" didn't work.

by don christner

On the machine take is always on, (or the one usually turned on first), right-click on Network Neighborhood, then select Properties. From the list, select "file and printer sharing for MS networks" and then click on Properties. Select Browse Master and then Enable. On all other machines, do the same thing, EXCEPT select Disable.

This will give your network only one browse master. Be aware that because of the way the browser service works, it can take up to 90 minutes to see changes in the available network resources. So if you turn your machines off every night, it will take a while to get a complete list of shared resources.

Don

by cwright2000

Doing the browse master thing helped on one computer only (the enabled browse master). But combined with installing NetBEUI, I know have a working network again.

by pravinsalaria

do this simple step in network panel
give same name in workgroup in identification
in configuration click the TPC/IP properties
secify IP address: like 198.54.205.1 (in your main computer) & subnet mask: like 255.255.255.0
in gateway put same IP add. only: like 198.54.205.1 add it
enable DNS configuration in host (name of your main computer), in domain: like vsnl@net.in
in DNS sever put IP add.
pls note only make slight change in IP add. of ur node like 198.54.205.2, 3, 4, 5 & so on
dont change any thing else.

This discussion is closed to new replies.