Discussion Locked

Computers unavailable/TCP/IP behavior

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I quick installed a new Win 98 computer on the network Friday as I was leaving. The network is a standard NT single domain with a combination of DHCP and static clients. I installed the client for networking and file/print sharing and etc and got on the network and can see my 4D database and so forth. I can see all the network but there are a number of computer that I can't connect to. I can see them but can't connect to them because they are actually unavailable. Yet, every once in a while, for a moment, I could connect.
I have temporarily solved it by adding NetBuei... Not sure what the problem is, other than I generally have more problems with the 98/95 boxes anyway.

7 replies

by ctpalmer

Have you tried installing a WINS server? WINS handles the NETBIOS to IP name resolution.

by Former member

Could be another browse master/election problem. If your users are just shutting down by turning power off then the browse list shows those PCs as still on the system even though they are not. It can take as long as 45min for the browse list to update. Also, if your users are just shutting power off then they are corrupting the registry (especially on Win95 machines), which usually results in a lot of complaints that scandisk runs when they start their machines. Search Tech Republic for BROWSE SERVICE for more info.

by coolflip

If you have a WINS server. Then try placing the IP address of the local master browsing station or local WINS server into the PRIMary WINS server section of your TCP/IP properties, then on the Secondary Wins server section of the TCP/IP properties place the IP address of the WINS server's that is closest to your PDC. That way, you are updated with the most recent list of computers on the network.

Coolflip

This discussion is closed to new replies.