Question Locked

Connecting Laptop To Old TV (RCA)

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Ok - I'm having issues connecting my laptop to my TV - I have the appropriate cables. I believe at least , I say this because The Screen briefly Flashes on the TV then goes back to blue.. So I believe I'm missing something along the way here.

Essentially this is the deal.
I have an Older RCA television with Componant cables capable (not HD) however , no S-Video or PC VGA input.

What I'm looking to do here , is use the S-Video I have on my Laptop , Hook it up to an S-Video to RCA (The Single Yellow Plug only Jack) Adapter and plug that into one of my Televisions 2 Available RCA inputs.

However , I can't seem to get the image on the Television.
Like I said , I know in some manner it's working I just am obviously doing something wrong.

When I choose to detect or play around with my Resolution Settings (Windows 7) I can see very briefly the image of my wallpaper shoot up on my TV for half a second then Vanish.

If I choose "Identify" Get the big 1 on my Laptop then chose Detect , it'll show Again Very Briefly 1/2 a second.. 2 on the TV over my Wallpaper.

So , what am I missing here..

I have a nVideo GeForce 8700M GT 4 gigs ram , windows 7 Dell XPS M1730 ; So I know I have the capabilities for this..

What's the Glitch?(or my glitch)

All Cables are new.
Many Thanks

I should also add , that my resolution does not go below 800x600

Scratch that , I've resolved the 800x600 issue however , when I choose to "List all Modes" The resolution doesn't actually change to what I remember 640x480 is.

I'm at quite a loss.
Thanks for the help from anyone who can provide.

11 replies

by ic-it

the 640 x 480 should work with a 60Hz refresh. You may need to drop to 16 colors.

by :merr:

Now I have another problem.

I've installed the "latest" drivers according to nVidia website.

They are the correct drivers for my Video Card. Obviously since the install wouldn't install otherwise.

Now When I connect the S-Video , nothing happens , no auto detection. However if I choose "Advanced Settings" Under the "Screen Resolution" Menu (windows 7) which brings me to the Video Card Properties. Or "Detect" for display detection. The laptop screen goes black , and still no image. I can not alter any settings , seeing as I can't see what's on my screen on either.

I found an Option in the nVidia Control panel under

Display > Set up multiple displays

"My Display is not shown"
When clicking this option I have the option for "Rigorous Display Detection"

I select this it tells me instantly it couldn't detect anything however I may enable TV Detection (The Cable is plugged in at the time)

To which the option below greyed out remains greyed out however the check box in it that says

"Force Television detection on Startup"
is checked , yet , still grey , and wasn't checked initially.

When investigating my nVidia Control panel without the s-Video plugged in.
there's no reference or even a clue to where these "clone"settings would be that the two pages you've shown me speak of.

I'm going to try now , Plugging in the cable , choosing detect. Then when the greyed out area become checked , I will restart my computer. Hoping it'll detect the television.

I'll be back to share my findings

Thanks for the help so far , hope we can get this working

Much Obliged

by :merr:

Ok - I restarted , no change. Same as before , no picture on either screen

So - I'm at a loss as to where to go next.

On another note
My resolutions are a little wacky now
i'm forced (if I want it to fit to the edge of my screen without black bars surrounding the image) to have my resolution be at 1920x1200 any less and I get black bars.

This is new

by :merr:

Thanks for the website

Heading there now

If that is the case however of it not being sufficient. Why do I see the image of my desktop clearly , even if it's only briefly?

by tintoman

would be a little outside my expertise I'm afraid

by older mycroft

You didn't get a brief flash of your desktop because you were heading in the correct direction with your Heath-Robinson project.

You got a glimpse because that was all the TV could achieve from the spurious signal emanating from the laptop.

As for your previously posted laptop display problems where you're getting black bars around the screen if you drop the resolution from its maximum ...

Go into the Nvidia Settings screen, but instead of looking at the Resolution settings, go for the Flat Panel Display settings.

"[i]These options allow you to determine how lower resolutions are displayed on your flat panel[/i]" - You'll find a checkbox against CENTERED OUTPUT. Change it to the box against DISPLAY ADAPTER SCALING.

Now you'll be able to drop the resolution as far as you want but the resultant image will still fill the available screen area. ;)

by :merr:

well bugger

haha , Appreciate the effort , I'm still looking into alternatives. However it's looking to go in the aforementioned direction.

If anyone has any other possibilities
I'm open to them

by fabioq

I have the issue as you do but I can manually set it. If you let be detected it will not work. You have to manually set S-Video and the image will stop flashing. Take a look at this link, it's for European TVs with PAL, so just ignore that part and keep the setting as NTSC is you're using a US TV. Everything else should apply to you.

http://www.sebastianvogelsang.com/2009/03/12/enabling-the-tv-out-of-an-nvidia-graphics-card/

This discussion is closed to new replies.