Question Locked

Connecting my wireless Dell to existing wired PC using D-LINK wireless

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Okay here it is....My parents home PC is wired by cable. I want to hook up their wireless D-LINK they have from before, to connect my wireless Dell on their network.

How do I connect their wired PC and my wireless Dell using a wireless router? I got as far as getting a signal but, not able to access any webpages.

I have looked and tried to no avail.

Please help, I am a rookie.

11 replies

by cg it

or a "how to" section.

this question is probably one of the most frequently asked question besides how to crack a lost password.

if there is no security enabled on the wireless router, choose if from the available wireless networks to connect to in the wireless utility your using.

if there is security enabled, then you need the passphrase or key. If you don't have the passphrase or key, then you have to log on to the wireless router and get it. If you can't log on to the wireless router because you don't know the user name and password, you can reset the router to factory defaults by pressing the reset button on the router. to obtain the routers default user name and password, see the router mfg web site and get the manula for the router model you have.

by 1bn0

When they were asking for input on improvments to the site.

Or a list of Frequently refered to articles.
Or a Tutorials section you could refer newbie members to.

by 1bn0

Disconnect the PC from the DSL, modem and make sure you can access the admin pages.
If you can't et in to the router everything else is a waste of time.

If this works. Power the DSL modem off then on. Power off the router and connect the WAN/Internet port to the DSL Modem and power on the router.

Connect the P.C. to the Router and Reboot.

Configure the router through the admin pages for Internet access.

Dont do anything wireless until the wired desktop is back on the internet and everything wired is working O.K.

Then you can attempt setting up the wireless.
Configure the routers wireless settings USING THE DESKTOP P.C.

Then configure the wireless notebook to match your routers wireless settings.

by hcream

At first, by reading the title, I thought you were trying to connect your laptop to your parents' PC. But then after reading the content, it sounds like you're trying to set up an Internet connection on the wireless router through the cable modem. Am I right?

If that's the case, your first task would be to setup a connection between the cable modem and the D-Link wireless router. You need to have access to the settings of both devices(usually through the web browser). Perhaps we can be more helpful if you can provide us information on: ISP, cable modem model & router model.

by w2ktechman

Turn the cable/dsl modem off (unplug it).
wait 20 seconds at least. Plug the cable/dsl modem in again.
Connect the router to the cable modem.
Plug in the router
turn them both on and wait 2 minutes.
connect a wired connection to the router

go to the config page of the router via web browser. Often it is set to 192.168.1.1

You shoul dbe asked to logon, if you have the username and PW, use it. If not, try the defaults for the router (usually no username, admin as PW)

configure the router (use the user guide for the router)
configure the wireless connection (again, user guide for the router). Set an SSID and security.
test an Internet connection.
test a wireless connection.

To find the afore-mentioned user guide, please visit D-Links website at http://www.dlink.com/

by suffolkpo

I,m guessing that yourv reference of getting a signal is referring to the wireless card signal.
you are going to have to go to control panel and open the network settings folder.see if thecomputer is showing more than one network connection. in your case you can disreguard the modem connection and your computers ethernet connection there are a number of ways to go to do this but the straight is close that window and start the wireless network wizard. it will prompt you to choose a network to join. at this point you select the d-link wirless router. follow the prompts until completeion and theren you go.

by stugotti2000

I know my question is popular and old news to answer for some of you but, thanks for the information.

As far as info is concerned, I don't think I need to list details. I think I just did not set up my laptop to the settings of the PC and or router.

I will try and see and then let yall know.

by stugotti2000

I asked my brother and we figured it out over the phone using logmein.com.

by rhondaclarke37

install windows xp on laptop now showing no wireless and can't connect

by stugotti2000

You need to set your wireless, so it AUTOMATICALLY connects to signals in the area.

Did the wireless work prior?

But someone who knows their stuff will give you a better answer.

This discussion is closed to new replies.