Discussion Locked

Connecting NT 4 to existing Win 98 netwk

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I've become an expert troubleshooting and installing my current Win 98 peer to peer network at home.

But now that I've inherited a copy of NT 4 Server I want to hook that up to the current network.

However I'm a bit lost with the diffrent network setting in NT 4 than I'm used to in Win 98.

Can anyone direct me to some good online tutorials, or walk me through the process themselves?

Any help would be appreciated.

Thanks,
Brian Wright
Starving College Student
http://www.wright-onthe-web.com

10 replies

by dmiles

It may be wise to get the tutorial,so that you get print them out,see the following sites
1)Networking Windows NT Server
www.cit.ac.nz/smac/winnt
2)www.ftq.com/nt
3)www.microsoft.com/education/tutorial/classroom/nt/chapter3.asp
Also use search with NT4 Tutorial typed in the box for more results

by bhrdwh

Here the senario is different, you'll be having NT domain instead of Peer-to-Peer.
1. Install the NT Server as Primary Domain Controller (PDC). Give it the same series IP as that of your PCs (say 192.168.15.1 / 255.255.255.0)
2. Remember the Domain name & Administrator Password.
3. Create users & their paswords on the PDC. 4. Also share a folder to these users. (say HOME - User1, User2 etc.)
5. In your clients network neighbourhood properties...
a.) CONFIGURATION - Client for Microsoft Networks - Logon to NT domain & Enter the domain name in the box.
b.) TCP/IP - check the IP Address, it must be unique & belong to the same IP series as PDC. (say 192.168.15.2 & so on)
c.) IDENTIFICATION - Workgroup - give the domain name here.
d.) ACCESS CONTROL - In "User Level Access Control" - enter te domain name here.
6. Login as "administrator" into the domain & doubel click "Network Neighbourhood" & click the Server
7. Here if you can see the shared folder & get inside it, THEN YOU'VE SUCCESSFULLY INSATALLED.
8.In PDC, you could also enable DHCP- it leases out IP Addresses to DHCP clients freeing you of remembering IPs.
Thats all !!!

by shanghai sam

Thanks, but srushbrook brings up a good point. If the Server screws up the whole networks down and I don't have a abckup at this point. Jsut looking for peer-to-peer for now.

by Member 35772270

Actually you have two options. You can install it as stated in answer #2 or and a stand alone mode which it will be added to your existing peer to peer. Both options are available during the installation process.

by borg7of9

Answer 2 is great if you want to set up server as a domain, however if you have a nrtwork at home, it cant be that big and security is not as issue, so I would set it up as a stand alone server, as stated you will have this option during installation. If you do set it up as Primary Domain, then I would always have a BDC (Backup domain) to take over if you your system screws up.
The advantage of setting up just as a stand alone, is that you get a chance to learn NT and its interface and still have all the feature of your peer to peer network. Thats how I have mine set up at home, and if you need help or have any specific questions, you can email me!!! (or post here)

by shanghai sam

As I stated above good point. I just want peer-to-peer at this point.

At this point I just need to find ARCNet drivers (Crossing fingers) and I'm set. Otherwise I'm upgraded to an Ethernet network finally.

Thanks for the help, I'll e-mail youif I have any trouble.

This discussion is closed to new replies.