Discussion Locked

Connecting the network to ADSL-internet

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I want to connect my network (192.168.0.#) to my ADSL modem (10.0.0.138).
I'm using NT4.0 server RRAS with two NIC's (A=192.168.0.2 & B=10.0.0.150) as Internet gateway and a separate NT server for the network. On the server everything 's fine I can explore the net at high speed.

The trouble is routing the Internet connection to the network. NIC A is the default gateway on the network DHCP.

From all workstations I can ping to NIC A&B but not to the modem or external IP's.

Routing tables seem fine, it will probably be a simple misconfig, just can't find it anywhere.

Anyone have a clue?
Jos

11 replies

by parbo

I had a setup like that the difference was that i run W2K. The downside is that the systems would fight over the connection. Here is how i had mine set up:
2 nics - Nic A to my cable modem and Nic B for a peer2peer connection. I had a portable connected to the peer and the ip settings on NIC B was 192.168.x.x Nic A receives settings from the DHCP (ISP) 24.x.x.x
On the portable i specified my ip adress 192.168.x.4 and the gateway is my NIC A ipadress.
The downside i was talking about is that if i had to reboot the W2k system the portable would take over the connection and the W2K system would not ba able to make a connection. I'm not sure how this works through a hub. Another one is that if the main system is down you cannot access the internet. I have purchases a netgear cable router and it works like a charm, since the cable router is in charge of the cable connection. Something you can look into if the 2 nic config doesnt satisfy your demands.

Let me know if you need more help

by lfross

Another way that would simplify your life wold be to purchase an inexpensive DSL router. Linksys makes a unit that is available for around 100$ and also functions as a 4 port 10/100 switch. This device will run DHCP for you so your client setup iseasy and will take the address handed out by you ISP. Hope this helps

by jos.bus

A router is not really an option because I want to connect another network (192.168.1.#) to the same ADSL. As soon as I get the first online.

by aljay

Have you tried using a proxy server?

It's what I used to share my internet connection to the rest of the network.

by jos.bus

After trying NT4 Server in several config's we decided Linux should do a better job, which it does. On the same machine with the same NIC's all is fine now. Both networks are able to connect to the internet without any problems.

This discussion is closed to new replies.