Question Locked

Converter IDE/ATA-USB

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I've bought a converter IDE/ATA-USB for being able to read with my actual PC (WinXPHE SP2) two disks of an old PC running Win98SE. I can read the first disk perfectly. The second one, even if recognized as hardware device by ny system (I can see it when I want to unmount the virtual USB device), hasn't assigned a logical drive letter, so I'm unable to read it.
I checked may times the settings, which, moreover, are the same for the two disks. I reminded that perhaps I compressed this disk, to gain space and, for this reason, XP isn't able to manage in a right way this device. Is it reasonable?
Thanks in advance.

5 replies

by bizzo

If your XP machine doesn't assign a letter to the USB device (I'm assuming it think of the USB device as just external storage), then if you go into Disk Management, you will be able to assign a drive letter to the device there.

by giorel

I can see the drive as a physical device in the listing of the hardware, but I don't see it in DM.

by hal 9000

In that case.

You may need to connect it to a 98 Machine and install the USB Drivers to read it or at the very least save the data off it if it's still working.

Col

by samuel.findlay

If the drive does not appear in Disk Management, but is recognised by Windows as an external storage device, then you may have a problem with the drive jumper settings.

Usually the drive jumper should be on MASTER, although if that doesn't work, try the other settings too. I got mine to work by setting it to SINGLE. When I did that, the drive appeared in Explorer straight away.

If the drive you have the problem with was the second drive from an old computer, it is quite likely set to SLAVE, and so that will be your problem.

Hope someone finds this helpful...

This discussion is closed to new replies.