2 replies
by cmatthews
I've gotten around the XP-mode issue a few times with v-box. Defrag your HD first or your V-disk will be fragmented too.
1) For the install, make a virtual FAT32 partition (under 32gB) and give the VM 512megs of ram.
2) Borrow an XP CD to install on your v-box but use your CD key. Activate XP, update, reboot and mount your program CD in V-box to install your program.
Note steps 3 and 4 would be required if your program CD is scratched or damaged...
3) Make the v-disk label and volume serial number the same as your old drive. MS has a serial number changer here:
http://www.sysinternals.com/files/volid.zip
Copy over the needed folders from Program Files to Program Files on the VM. Depending on the program (you have not told us..), this may be enough.
4) (If req'd) You may need to import quite a few registry settings from the old registry, old dll files's (usually in c:\windows\system32) or other files (eg: c:\program flies\Common Files) required by your program... It's a bit of trial and error, but note the errors you get on each successive attempt to run your program. (eg: "unable to find xyz.dll in c:\windows\system32"). If your program requires a background service, well that's a bit more work to register. FAT32 was suggested as a disk format since NTFS can be a pain with copying this kind of stuff..
I hope your program CD still works.
by higdonjeff
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending