Discussion Locked

Creating File and Print Shares

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am planning to use Microsoft File and Print service failover using MSCS. I have two servers called CL1 and CL2 and I have created the Cluster. Now any one can help me how to create the Print and File share. I will appreciate if any one can give mestep-by-step guide to setup the File and Print failover service.

7 replies

by frobo

Hi,

i will show you how to create an setup the things on an Cluster.

1. FileServer

First some basic things to now, each Group in the Cluster represents virtual Server?s. Like an real Server you need Harddisk space for each Server and an Name and an IP-Adress. Put this things in List, for later like : Server Name IP-Adress Resources

Now open the Cluster-Administrator, normally it shows you as much Groups as Disk. Take the Group you want to be a Print Server and Create an IP-Adress with Right Click and create Resource. Choose IP-Adress and give the Ressource an uniqe Name. Type the IP-Adress and set Dependings on Disk, no preferd owner. Right Click on the New Ressource and take it online. Now Create the Name equal to above, but Ressource Depending on IP-Adress. Last but not least create the Spooler-Ressource in this Group.

Now take a client and login as an Admin, check if you could reach the new Virtual Server. (Ping on name and Adress).

Install the Printer Driver on each node, you should have installe the TCPIP-Print Services first !! Choose local Printer and create a new Interface (RDP-Port) Give this a Name and right IP-Adress. Be shure to do this the same way on each node !!!

After the Installation delete the Printer on Each Node !! (We care about the Printer Driver and the configs we made for the TCPIP Print Deamon)

Now goto the Client and choose from the Networkneighborhood the Virtual Printserver and click on new Printer. Enter the Information like before on the Nodes.

Now you have the Virtual Print Server.

Hope it helps

Frobo

by frobo

2. FileServer

Click on the Group you choose for File Server, and Create the Ressources for IP-Adress and Name like before. Create the Path with the Explorer and the share with the Cluster-Administrator. Right Click on the Group and chosse create Ressource. Choose Fileshare, and Enter an uniqe Name for this Ressource and then Enter the Path and Share-Name.

Noe you created an Virtual File Server.

|||| The space wasn?t enough |||

Frobo

This discussion is closed to new replies.