Discussion Locked

database limit on NT

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am receiving an intermittent error message in my event viewer stating that the "disk is not ready yet" this stops my oracle database I am running the database on an external disk array with a scsi connection the database is 25 gig. This message seams to appear more often when we are importing a large amount of data. Could there be a size issue here.

1 reply

by nettek

This is often an indication of a hardware problem. Check for loose connections on your SCSI cables. You may also have a disk that is going bad. Check the manufacturers documentation to make sure your hardware is within recommended settings (SCSI cable length, proper termination, etc.)

It may also be a configuration problem with you SCSI controller adapter. Check the manufacturers documentation to make sure that you have properly configured the BIOS for use with your hardware and array. Also check to see if the manufacturer has any updated drivers or firmware.

This discussion is closed to new replies.