Discussion Locked

Defrag not starting

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
What could cause my defrag to not get past 0%, it keeps trying to run but sits there and never passes 0% until i terminate the program. It is a Win98 SE machine

7 replies

by dmiles

1)Run the anti-virus to make sure that you have not picked up a virus
2)Disable Power management before you run defrag
3)Disable the screen savers before running defrag
Try running scandisk before the other three suggestions before proceeding

by ann777

Before doing a defrag...
1) start--> programs --> accessories --> system tools --> scan disk and make sure that automatically fix errors is checked. (an error on the hard disk drive could prevent defrag from completing or even starting if the error is at the beginning).

2) In addition to the above suggestions for defrag, I recommend that you:
a -- disconnect the computer from any network (if it is attached to a network the computer will see network activity as disk activity and restart the defrag)
b -- disable any anti-virus program before running defrag

by jmatt

Press or toggle F8 during bootup ( when , verifying DMA pool message comes on )
Select , Safe Mode .
When you get defrag finished , try Win ME defrag .
--------------------------------
There are many fixes for W95/98 defrag , but the best is toinstall
Windows ME defrag ( free ) , very fast . I don't need to close
( ctrl/alt/delete ) anything down to run defrag , no restarts .
Get it from here .

W9X-Me-Defrag
http://members.home.net/scotterpops/enhancements/enhancements9c.html
http://surecool.com/download.htm

Download it right into your Windows directory. Rename your
current version of DEFRAG.EXE to DEFRAG.OLD, then rename
winme_DEFRAG.EXE to DEFRAG.EXE ( or whatever the old defrag
was named )

=================================

Also , to make W98 Defrag even Faster for it's 1st run , from
Explorer , Delete all the files ( except the read only file )
in Windows / Applog .
Taskmon will rebuild the Applog file .

=================================

To put the defrag in it's correct place .
Open Windows explorer , go down to Windows , left click on the yellow
folder , this opens the right hand panel .
Scroll down to defrag & write down the exact name . Next , right
click on defrag , scrolldown to rename & click on it . Now left
click at the end of defrag & add the word old . So if you had the
word defrag , it now becomes defragold .
Now rename MEdefrag to whatever you wrote down , drag & drop it on
the yellow Windows folder or anywhere in the right hand side .
Both achive the same thing & Windows will after you close , put it
alphabetically . That's it , John .

This discussion is closed to new replies.