Discussion Locked

DHCP re-assgning IP addresses

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a Primary and Secondary Scope of IP addresses.Do you know how to re-assign an IP Address from a Primary scope. The primary scope was at 100% capacity and now assigned an address from the Secondary scope,and it will now continue to renew the address from the secondary scope.I want the PC to get an IP address from Primary scope. How do I do this without assigning a static address.

7 replies

by mackem

You can use the mac address of the NIC and assign this to the primary scope. You ca find the mac address of the local address with ipconfig /all on the local pc.
Hope this helps.

by deltree

The quick and dirty answer is to reserve the address from the primary scope for the client.
The client will then always get the same address.

by bmccool

Assuming that a PC renews it's address within the lease time you set on the DHCP scope, it will ask for the same address first then ask for a new address.
This happens automatically at 1/2 the lease period. So in most cases the PC will stay in thescope it start in.

Now to get it there, DO THIS OFF HOURS,
users get cranky if you kill off their IP's.

On the DHCP server make sure you have a free address in the scope you want the PC to be in. If none delete a lease from an offline PC. Nowdeactivate the other scope, and release/renew on the PC in question.
Reactivate the secondary scope and no one will notice anything happened.

:)

This discussion is closed to new replies.