Discussion Locked

DHCP Scopes

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Assuming that I have created two scopes in my DHCP Manager, say 10.1.1.50 to 10.1.1.250 in the first scope and 10.2.1.50 to 10.2.1.250 in the second scope.
How does DHCP Manager assign addresses from the second scope after the addressess in the first scope exhaust ?

3 replies

by bhrdwh

If looking to have two different networks with one PDC, you can use two scopes on the same DHCP Server with two different NIC cards. Assign one card IP 10.1.1.51 & attch it to a Switch / Hub. This will cater to all systems on that Switch1/hub1. Then assign IP 10.2.1.51 to the other NIC, attach it to other Switch2/Hub2. This becomes your other network.

DONT CONNECT THE SWITCH1 / HUB1 TO SWITCH2 / HUB2, ELSE YOU WILL HAVE DHCP ERRORS.
DO LET ME KNOW IF IT WORKED.
AKASH

This discussion is closed to new replies.