Discussion Locked

DHCP Service will not start

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Recently, a problem arose on our LAN server. We are running under WINNT 4.0 (SP5). DHCP Service will not load upon startup. When you try to start the service manually, an error message pops up (10022). Technet does not have an answer for this. I am wondering what the solution might be or what type of problem this is. I am hoping that it is something that I am overlooking. We are only running TCP/IP protocal. The Clients are all running WIN95. We are due to have a new Server installed on the Network the first week of January. This will be a member server running a memory hogging application that the business uses. I am trying to avoid promoting it to the PDC initially. I might be missing some details that are needed. E-mail me at mrtjan@execpc.com and I will be glad to provide info...

7 replies

by msgtray

I like most techies want to know why something doesn't work. In this case it may be moot. DHCP is so easy to install and configure, I would just document the settings (important), uninstall and reinstall the service. Remember to reboot between the uninstall and reinstall, and reapply the service pack to finish.
If this dosen't solve your problem, check for a dependant service that is failing.

Hope this helps,

Ray

by mckaytech

I have this distant recollection that a 10022 error code has to do with the DHCP database. In my experience, database problems and registry mischief are the two most common causes of DHCP failures if the TCP/IP stack is working otherwise.

I agree with the other answer that the most likely solution is to un-install and re-install the DHCP service with a reboot in between. If that doesn't work, there is probably a problem in the registry and you'll need to take a careful look at the registrykeys associated with DHCP.

But you also have the option of using the new server to host DHCP services for your network. It would not have to be a PDC and the workload would typically be light enough as to be un-noticeable.

paul

by singhjunk

It looks like either you need to apply service pack 6a on Nt 4.0 and restart the computer see if that works if not could be a corrupt data..

follow the following

Preserve your DHCP server settings if I have to uninstall and reinstall DHCP?
Make a copy of %SystemRoot%\System32\Dhcp\Backup\Dhcpcfg and save it in your favorite safe spot.
Uninstall and reinstall DHCP. Before restarting DHCP, reapply your current Service Pack.

Restart the DHCP service to allow the installation to finish. Then use Control Panel / Services to stop the DHCP service. Edit:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DHCP Server\Configuration

Highlight the Configuration key and click restore from the Registry menu. Type the path of the saved Dhcpcfg file.

Restart the DHCP service. Verify your settings using the DHCP Manager.

This discussion is closed to new replies.