Discussion Locked

DHCP Troubles

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Well, prior to starting with the company I am with, the system administrator used routable IP address from the class C subnet the company leases fro internal clients. I decided this was not logical and wanted to configure DHCP for the LAN. Some background for troubleshooting sake. The LAN has about 100 nodes, small network, only one gateway/Router. My first attempt was configuring my PDC for DHCP, and had a hell of a time since I had forgot to change the IP address to the Subnet I was using for my internal network. Hence, nothing could find a DHCP server. Anyway I was finally able to gather a password error and the DHCP log showed a assigned IP address to the client computer, However, now I have lost the ability for personnel to login to the PDC. WINS is also setup on the PDC. I assume I have this problem since I have used my PDC. My next attempt will be with a stand alone server running DHCP and attempt that.. Any hints?? Help??

Thanks,
Dan

6 replies

by sgibbs

I'm going to assume the router is using the class C subnet the company leases. If that's the case you need to install a second network adapter in the PDC and configure it to use a class C address on the same subnet as the router and set the router address as the default gateway for that adapter.
Turn on IP forwarding and configure your original adapter with whatever scheme you've chosen for your internal network. Exclude the PDC's address when you set up the dhcp scope and make sure you set updhcp so the clients see the internal adapter as the default gateway.

by ozwald

Looks like that is the way I'm going to have to move, However I believe I'm better off using an additional machine for DHCP/WINS rather than placing the routing responsibility on the PDC. Whats your thoughts on this.?

by sgibbs

NToz is correct. My assumption (I guess it's true what they say about assuming things) was that in a small shop they may not have control of the router to make the suggested changes

by ntoz

Before you configure the PDC with a second nic card and try routing through your PDC, I would suggest instead to have the chages made to the router. If you add a secondary address range to the Router, the router will handle the routing, where it belongs. Im assuming your using a reserved class of IP addresses for your internal network. For the example I will assume [192.168.1.x]. Staticly assign ip addresses to your servers. Pick an IP address for use by your router. Then set up a scope for therange your using. Reserve the portion of the range you used for your servers and the one for the router. Then configure the router to use the IP address of your local area network as a secondary address on a port (Cisco Routers Can do this). Finaly use the ip address you have given your router as the default gateway for your DHCP scope. This will allow all of your systems on the lan to see each other and use the router to reach other parts of the network. Finaly if your going to reach the internet, use either a proxy server or Network Address translation on the router. This is a more senseable solution.

Pete

by ozwald

Hello Peter thanks for your response. I understand your response and the theory behind using the router. It would be much more productive and routing the traffic would be efficent. The problem I have is my gateway is actually my firewall which runs on a NT SP6 box Multihomed. One IP being my ISP and the other my leased subnet. This is the IP address I currently use for my default gateway within the network. By doing this my router has a workload of nill, I understand, but that is the direction the prior adminstrator turned. I assume now my only choice for DHCP is to assigning the service to a multihomed PC that will act as my gateway to my firewall/Internet and the leased subnet.? However appealing your idea is, I'm stuck with theprocessing power of NT. I have also read 2000 is a bad alternative when your PDC is still running NT? Can you give anymore insight or idea on this.? I apprciate your help thus far, Thanks!!

This discussion is closed to new replies.