Discussion Locked

DHCP unable to authorize in AD

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am running a DHCP server in Win2k Server and when I stop and start the DHCP server I am unable to authorize the service in Active Directory. I get a message that says: " The specified servers are already present in the directory service"

This server is multi-homed so I thought that perhaps this is causing the confusion. However, I've tried to bind the service to only one of the NIC's and it still won't authorize.

5 replies

by rmelendy

I've come across this problem in the past. Although I'm not sure of the exact cause, in my case the problem was solved by going to your TCP/IP properties>>>Advanced>>>Dns Tab>>>and checking the box that says "Use this connections DNS suffix in DNS registration" HTH.

by jmstitt

Hi. I have had the same problem on my multihomed DHCP servers. Does your DHCP server login to your domain or does it login in locally. You probably all ready know this but to authorize, you must authorize it as an administrator of the domain. If you are logging into the domain or DHCP runs on your domain controller, then check your IP leases. If you have some that are bad or many that seem like they should have expired, then delete them. If I see DHCP hanging in this manner, deleting all the leases will clear it out. Then you can try to restart the service. Also, I am multihomed with a NIC assigned to each subnet. I kept developing a problem with 1 subnet and the other subnet's IPs would be all used. Could not get the problem stabilized, so I created another DHCP server and moved the other subnet to it. A good way to do DHCP is to split it up like this anyway. A 70-30 split is usually the best, but I am doing 50-50. I have also set my leases to expire in 45 minutes. When I was having a problem though, I had leases expire in 5 minutes, that way I could see if DHCP was hanging or not. Also, to see if DHCP is actually authorizing, press F5 during the operation, it will force a refresh so you can see what is happening.

This discussion is closed to new replies.