Discussion Locked

Dial Up Connect to FTP Program

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

NT4. server

I am running FtpBison ( a 3rd party ftp program), as a BBS, for clients to login and download files. The clients log in from their browser, into eg... ftp://name:pass@203.33.33.33
This is working perfectly ok.
---------------
My problem!!!!!!!!!!

I do have 2 modems connected to the server and wish client calls to these modems, to be redirected to the same Bison ftp program.

How do i set up RAS to accept the Modem Dial In and set up a IP Address and Port, so that the ftp program can accept the calls.

Which program would the remote customers use to call the above modems and be able to control download etc, after logging into the ftp server program.

I imaging after setting up the IP Address and Port, I would have to run a second and third copy of the Bison ftp program, to access the extra ports??

Would appreciate some detailed procedure for the above, if anyone has the time .

Regards

3 replies

by rahul

It is not possible for you that your clients can directely log on to the ftp program .
Instead of running a 3rd party why dont your install iis with your winnt which have a ftp server of its own but for that also the clients have to request for theftp they cannot be directely connected to the ftp port

by turnerrob

Thanks ruhul, for your advice.
I have IIS installed and ftp server,
and have given it a go,
but have tried to use a 3rd party ftp,
as all the administration is easier.

Will revert back to IIS/FTP

Thanks again.

This discussion is closed to new replies.