Discussion Locked

Dial-up Networking and PWS conflict

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a primary computer with dial-up internet access. I set up a second PC running Person Web Server software so I can beta test my web site designs before publishing them live on the web. The PCs are connected by standard 10 Base T nics and a little hub. On my primary PC, when I open Internet Explorer and type in the name of my host machine, I expect for it to show me the contents on my web server, but instead it always goes directly to dial up the internet before even checking my local LAN for the info I requested. I've tried adding my server first in line to my DNS table and it ALWAYS dials the internet before looking at my server. It also wont recognize my server by name but only by the IP address I assigned it. What settings am I missing to have ALL TCP/IP requests look at my server BEFORE dialing my ISP?? One of the reasons I even set this up was to be able to work and publish my Front Page webs to a server without being on-line, but my main PC demands I connect with my modem first. If I cancel the modem dial-up, it tells me it will work Off-Line and I cannot hit my server. I can't even ping the server without the modem logging me into my ISP. Please help ease this headache! Thanks!

7 replies

by sparent

Me thinks the problem is with your Internet Options (under Control Panel).

Under Windows 95 or 98, go to the Connections tab and make sure that the radio button is not on for Always dial my default connection. (Try either one of the other two buttons.)

by bucko77

You need to tell your browser to bypass your Proxy Server (or in this case your ISP) for local addresses.

If you are using IE then click on the LAN settings button on the connections page under Tools - Internet options.

If you are using Netscape, it's under Edit - Preferences - Advanced - Proxies.

Good Luck

by churdoo

The root answer is related to name resolution in your network setup between the two boxes. If you can ping your "stage" box from your primary box by local IP, then it's the name resolution that's not working.
First of all, are you using private IP's on your internal network?
Assuming yes to the private IP question, The easiest way to resolve the name resolution, without having to troubleshoot all of your network settings, is to find the lmhosts.sam file in the c:\windows directory (assuming Windows 9x, or use Find Files to find your lmhosts.sam) of your primary box. Open the file in Notepad or other text-only editor and add an entry for your "stage" box to that file. The file is fairly well documented, so you should have little trouble doing this. I don't recall if you have to reboot after you edit the file for your system to recognize the update.
Additionally, you may or may not have to modify your Internet properties/connections to "Dial when needed .... " instead of "Always Dial my default connection..."
Good luck. You may contact me for more info if needed.
--Charlie

by awarner

Thank you for submitting an answer. The first person nailed the problem with the one little setting I couldn't find. Which you too pointed out near the end of your suggestion. Thank you for your time.

This discussion is closed to new replies.