Discussion Locked

Dial up Networking hangs up Modem

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have two PC's connected to the same line via dial up modem. One runs 98 and the other NT Both worked fine until about two months ago when the NT workstation started to hang up the modem constantly. It will work fine while data is transferring but as soon as it gets some idle time it drops out. Through a lot of chopping and changing I think I have eliminated all but the PC (3 modem's, 2 Phone cables, 3 Serial cables, 2 ISP's, other PC on same line has no problems, local telecom's diagnostics gave a perfect result) I have changed the modem properties setting for disconnecting a call if idle from 0 to ~8000 and even modified the DisconnectIdleTime registry key but nothing seems to fix the problem. Has anybody got any ideas.

7 replies

by csmith

I have run in to this same Windows NT bug.
Unfortunately the only fix I found, was a from scratch reload of the OS.
Regards, Chris

by dinstone

Sorry Chris
But that is the one answer I did not want to hear (and neither does the little fella who wants me to fix the big Pu'ter) If this has come up before there must be somebody who knows what is causing it. We need an NT guru!

by jbarrett

Daft question but did you uninstall the modem drivers and software. Is it an external or internal modem? If internal take the card out and reseat it etc then reload everything? Check there arent two drivers loaded or that even though you installed the actual proper drivers it has defaulted to a generic standard driver.
Dont know if this helps?

by shanghai sam

Sorry to say but all 3 modems were external. Each swap the drivers were unloaded before the new modem was set up. I loaded them on different ports to eliminate port hardware problems, downloaded the latest driver for the main one and even tried the generic driver. This has got to be something with NT. Thanks for the help though. Hmmm I did forget to mention they were externals didn't I.

by csmith

Hi D,
Don't be too hard on yourself. When you said 2 serial cables I picked up that they were external, but that is all irrelevant.

I recommend closing this question and reposting it in NetAdmin , NT section.

This is really a hardware section, and you are looking for a software genius.

Has Microsoft admitted that this bug exists yet?

Don't worry about any points.
I obviously don't need them, however I would like to know how this turns out.
Please drop me an email if the semi-miraculous occurs, and you find a quick and easy fix.

Regards, Chris

by dinstone

Thanks Chris I've taken your advice and reposted so we'll see how we go. I don't know if Microsoft is aware of this problem. They should have something like this forum :>)
But I shall keep you informed if anything does show up, I'm beginning to wonder if one of those registry cleaners might do the trick as this thing just showed up one day without warning?

This discussion is closed to new replies.