Discussion Locked

Dial up Networking hangs up Modem

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have two PC's connected to the same line via dial up modem. One runs 98 and the other NT Both worked fine until about two months ago when the NT workstation started to hang up the modem constantly. It will work fine while data is transferring but as soon as it gets some idle time it drops out. Through a lot of chopping and changing I think I have eliminated all but the PC (3 modem's, 2 Phone cables, 3 Serial cables, 2 ISP's, other PC on same line has no problems, local telecom's diagnostics gave a perfect result) I have changed the modem properties setting for disconnecting a call if idle from 0 to ~8000 and even modified the DisconnectIdleTime registry key but nothing seems to fix the problem. Has anybody got any ideas.
By the way, all modems used have been external and I have not encountered any driver conflicts. Each modem has had a clean install with its own driver and I have also tried to use the generic driver. Sigh

5 replies

by csmith

Hi D,
Its me again,
The DisconnectIdleTime should not be above 6000h (Forgot to mention that, sorry.) I like 5FFE (That is 24,574 minutes)
Is service pack 6a installed on this PC?
Did you read Microsoft Knowledge Base articles # 164257 and 174338 ?
I tried a registry cleaner on this problem, and had no luck.
Problems like this are the best argument I know for Tape backup.
Good luck.
Regards, Chris

by dinstone

They dont give you too many options for rating do they. Thanks for the help Chris, it was all very good information. Thought I had it with MKB articles but to no avail. This thing is still here to anoy me.

by mj_ells

I have had similiar problems with DUN on NT machines. After installing the VPN or setting DUN hit with the service pack. Sometimes the RAS becomes corrupt and re-hitting it with the service pack will fix things.

by dinstone

Hello Mj
Thanks for the advice but unfortunately sp6a was the first thing I hit it with. Just wish it had of been that easy :>)

This discussion is closed to new replies.