Discussion Locked

Dial up ...W2K prof

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

When I dial in I get to my e-mail and internet, but not to the network drives.Please help!
Server is W2k.

9 replies

by lino767

Sorry about that.

I have w2k prof laptop. Whenever I dial from remote to work I log on fine, but I get only my e-mail + I can browse the internet. The problem is I can't get the network drives F,G,H, etc. to map. When I try to map them while I amloged on I get error message " The mapped network drives could not be created becouse the following error has occured: There are currently no logon server available to service the logon request." The problem seems I can dial in and log on to the E2kserver but not W2k (file server).

Everything works When I come to work and logon to the LAN.

by cyan222

When logging in on to a companies Internet access, they will only allow you to access certain things on the network. For your case the administrator has probable made it so that you cannot log in remotely via dial-up and access shared resources. If you wanted access to these drives out side of work you would have to enable offline browsing witch you would have to select the folders you want to be able to view offline, You would do this while you are connected to the network directly. Then everytime the PC is plugged back in to the network your computer would synchronies with the sever and update everything. And you will be able to use the shared resources when you are away from the network. Just make sure that you don't select to many folders to brows offline or you will use up you hard drive space quick.
If you need help learning how to make shared item viewable offline you can search the windows help files under "offline browsing" or "shared folders"

by lino767

I have the correct permission to get to all resources. I am listed under the admin group too.

by seschulze

It seems that maybe the TCP/IP protocol is being used over your RAS connection, but your NetBEUI protocol is not being used. Try to enable this.

Steve

This discussion is closed to new replies.