Discussion Locked

Dial-Up - Win98 - Can't connect

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a laptop that I have loaded Win98 with FAT16. I am not able to make any dial-up connections. The message I get says that it can't establish a compatible set of protocols, and suggests checking my network settings. I am sure that I have everything set right. I have tried my on-board modem as well as a network modem. I have tried dialing different numbers. I have removed (and actually deleted and replaced files) dial-up adapter, Client for Microsoft Networks, my network adapter, modems, etc. After replacing all this I still have the problem. Any suggestions? I'm about ready to reformat and reload, but would love to avoid that hassle.

5 replies

by shanghai sam

If that doesn't work, I would yank EVERYTHING out of Network properties (save any info you'll need like DNS IP addresses and such), remove the modem from Control Panel/Modems as well as from Device Manager. I would also consider deleting the DUN icon or creating a new one after the reboot that's coming up. Reboot and let the modem be re-detected and re-install the driver. That should insert a dial-up adapter and TCP/IP in Network properties. Create the new DUN connection and see where you are. You don't want Client for Microsoft Networks installed unless you have a LAN or connect remotely to a LAN!

by rick.philips9

I had the same problem on 2 machines. (a laptop and a desktop) several gurus attempted to fix it including the complete network stack. The final fix was to backup your files and re-install the OS.

by rick.philips9

I had the same problem on 2 machines. (a laptop and a desktop) several gurus attempted to fix it including the complete network stack. The final fix was to backup your files and re-install the OS.

by mickrose7

This message is the norm if you have
left the tick in the tick boxes alongside Netbeui and IPX/SPX in DUN for your connection to the internet found under the server types tab.

This discussion is closed to new replies.