Discussion Locked

Disappearing PCs in Network Neighborhood

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have an NT4 and Win2000 servers with Win2000 Pro users. PCs and all added to single NT domain. Computers see each other in Network Neighborhood and works find for couple of months. Now in network neighborhood most computes are gone(disappearing). In server manager they are all there but grayed out. What's wrong and how can I fix it?

8 replies

by bsberry

As a starting point I might recommend that you look at your bindings in network settings. In particular look for problems with netbios. Make sure that your servers and the disappearing workstations have netbios over tcp/ip enabled.

by ezmoney

Believe it, because bsberry maybe right. Nt4 and Win2k dont like each other. So try removing and installing the protocols on one machine and see if it comes back if so then you have solved your problem go all nt4 or all win2k but dont mix it it or thats what I hear.

by jkohut

This could actually be the same problem but with different symptoms. When a computer is added to an NT Domain (which is what I assume you are talking about when you say Server Manager)they are there until they are removed from the Domain via Server Manager.
If they show up as "Greyed Out" the Server (PDC) has not had contact with that PC so it doesn't see it as active (if it sees it, it will turn blue).

The view from Network Neighborhood on the other hand is only "active computers" i.e. only ones which are powered up will appear, but they must be communicating that they are powered up. Via broadcast announcements to the domain controller (or Workgroup) via network. Sounds like broadcast functionality may be a problem on your network. Have any router changes taken place since the problem started?

Look on Microsoft site for more information about Network Neighborhood browsing problems.

Good Luck
Jeff

This discussion is closed to new replies.