Discussion Locked

Discontinue constant modem dial-tone

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am using the OApen FM56-ITU/2 modem on a Windows NT 4.0 PC. The telephone line is connected form the modem with a long cord to a wall jack on another side of the room. When I go to dial out, I can hear a voice message that says "you have exceeded the time for dialing." This seems to be due to the modem dial-tone constantly going even though the modem hasn't actually started dialing the number. After a short time, the computer prompts an error message that says, "Error 692: Hardware failure in port or attached device." Things I have done to avoid all of this so far include 1) unplugging the phone line from the phone jack and the opening the modem dial-out screen, then quickly running over to plug the phone line back into the jack, and running quickly back over to the computer and mouse clicking on the dial button; or 2) have someone stand at the phone jack, unplug the phone line, then I open the modem dial-out screen, tell the person to plug the phone line in the jack and they do, and then I mouse click on the dial button. Does anyone know of any better way to get this done? Is there some way to cut off the modem until I am ready to dial but still leave the phone line plugged into the phone jack?

Thanks.

3 replies

by hrhold1

Although I am not familiar with this brand of modem, it sounds like one of two things;[1] modem has a bad component - Does a different modem do the same thing? [2] Do you have the 'latest & greatest' driver installed for this particular modem, and the right O/S for it? [http://www.aopen.com/scripts/util/ftplist.asp?pub/driver/modem/fm56-itu2/WinNT_103b_fcc.exe]
This is the link for your stated modem.
Another thing you could try is to uninstall/re-install the modem to see if there was a'missed' file or a bad file copy during the original installation .

Hope this helps .... H

by doug22

I tried the uninstall/reinstall and hadn't seen any difference. I will follow the link you provided and see if I can find something there that might help. Thanks.

This discussion is closed to new replies.