Discussion Locked

Disk I/O Error: Status=0000AA00

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Windows NT could not start becasuse the following file is missing or corrupt
\WINNT\System32\c_1252.nls

I have tried recovery using the W-NT CD with & without the ERD. No go!

Before I take "pain killers" and do an Install, any ideas?
Thanks,
Fred postmaster@tek-mate.net

5 replies

by peter ritchie

If you can boot from floppy and your WINNT directory is in a FAT partition simply copy the C_1252.nls file back into the \WINNT\system32 directory.

If you're in a NTFS partition check out www.sysinternals.com for some useful utilities to allow you to boot from floppy and be able to read/write an NTFS partition.

Otherwise, re-install over your current installation to keep all your settings. Answer "no" to any messages asking to replace files (other than the nls file, of course).

by valachi

I am not sure. Your problem might be related to some other underlaying problems (like hardware issues). Please run a hardware check (at least on the memory - with the L2 cache disabled, and on the hdd) and after that you might try 2 things: either make an alternative installation (in a different dir) and try to overwrite the corrupted files with problem in the main installation either try to reinstall the NT on top of the old installation (this should also repair the corrupted files and it could also save you from having to reinstall and configure the application). As about not having an ERD, you should use the "rdisk /s-" from time to time to update the %systemroot%\Repair information. Check on jsiinc.com to find out a batch that can do that and also centralize all the Repair information on a server.
Still, it is intriguing that the c_1252.nls is preventing the NT to boot up. Well, if you create a second installation and manage to boot up you will be able to check more about what isgoing on.

This discussion is closed to new replies.