Discussion Locked

Display Monitor Drivers after disk FDISK

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hard disk failed, had to load a new hard disk. Win 98 2nd edition loaded but shows 16 color. I have tried web on Monitor "Dell" but all failed. What markings, if any, do I look for inside the PC.

Alan

8 replies

by parbo

Is this integrated video or do you have a video card. either way there will be a chip indicating what brand/model you need and you can go from there or go to dell's website and search for your model and check the configuration to see what video cardyou have in the system.

by paulp

It sounds to me like your video controller has not been set up. WIN98 does not include drivers for every possible video controller, and if it can't figure out what video controller you have installed in your system, it will default to 16 colors.When you install the proper video controller drivers your video should be just fine.

by alan.robinson14

Obviously, it will be fine once I install the correct driver but "WHAT DO I TRY or SEARCH ON" The monitor is not the video card, I've tried all Dell's drivers.

Alan

by rabbit_runner

You do not need to be concerned about the monitor. Your computer's problem is with the Video driver. Here is what you look for...
1. Open your case and find where the monitor cable connects to the computer. It will be either to a CARD that plugs into a slot on the motherboard, or it will be attached to a cable that plugs directly into the motherboard.
2. In the first case, look at the card and determine the manufacture of the card. Also try to find the particular version of video card. Sometimes you have to look at the large chip on the card, it may have information on the driver that you need. I cannot say excatly where to look, because each video card is different. Each manufacture uses different markings.
3. If the case it that the video connection plugs directly into the motherboard, check the chips on the motherboard. Usually one of the chips will have the video version. A couple of examples are ATI S3 TRIDENT, and there are many others
4. Another place to look is, whenthe computer was purchased, did you receive any CD's or books with the unit? Sometimes you can find a particular video driver file on a cd or floppy that came when you got the system.
5. lastly, ask a computer technician to look at your system to see if they can determine the video driver you need.
NOTE: If you are using the same monitor now, as before the hard drive crashed, then the problem is definitely an incorrect video driver.

by rabbit_runner

In addition, once you can determine the video card version, you will need to go to the manufacture's web site and download their drivers.

If I can help further, please contact me. I hope this can help you a bit.

This discussion is closed to new replies.