Discussion Locked

Dissapearing Netware Printers from Win98

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We have a problem with network printers just vanishing from windows 98 workstations on a Novell 4.11 Network. No warning just gone. In the printer folder all that remains is the "add printer" icon, nothing else. A simple reboot cures this anomole but we need to cure this correctly as our associates frequently print to these Netware printers. When a print job is sent to a Networked printer that is "not there" anymore the systems locks up and valuable time is waisted rebooting the unit not to mention the print job(s) lost. This occured only on a few units and is becoming more and more frequent among our Win98SE based machines. Anyone have any input on this or better yet a fix ?!?

1 reply

by col1n

I have experienced this myself

I used HPJetdirect cards on all printers I gave them static ip adresses and
reinstalled all hpjedirect software on all
local workstation then I manually set the printers to the ip address, this cured the problem but I am unsure why. As an added benefit this means if ever you loose any of the servers you will still have peer to peer printing.

If NT Option
May be a good time to clear DHCP and pack
take out any old reserved/exclusions/Static and unused tcp/ip addresses they will have a cross + against them.

You may want to rebuild the scope and reallocate users with somwe static ip
addresses.

You may just check that you are not running
seperate remote hubs where you have several
users connected via 1 rj45.

Better still if you are using a BDC set all the printers to point and print via NT

Hope this helps
Best regards
Colin

This discussion is closed to new replies.