Discussion Locked

dma

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
i try to set my dma to on for my dvd but when my computer resets its not checked

11 replies

by jmatt

http://www.windows-help.net/windows98/tune-35.shtml
http://www.techweb.com/winmag.com/columns/explorer/1999/1206.htm
http://www.pchell.com/hardware/irqs.shtml

http://support.microsoft.com/support/kb/articles/Q232/5/45.ASP?LN=EN-US&SD=gn&FR=0&qry=DMA&rnk=7&src=DHCS_MSPSS_gn_SRCH&SPR=W98
Description of Ultra DMA
Microsoft Windows Millennium Edition
Microsoft Windows 98 Second Edition
Microsoft Windows 98

http://support.microsoft.com/support/kb/articles/Q258/7/57.ASP?LN=EN-US&SD=gn&FR=0&qry=DMA&rnk=9&src=DHCS_MSPSS_gn_SRCH&SPR=W98
How to Enable Direct Memory Access (DMA)
Microsoft Windows 98 Second Edition
Microsoft Windows 98
Microsoft Windows 95
Microsoft Windows Millennium Edition

by dmiles

Open the CMOS control panel to the BIOS,and under hardware configuration
Set up as CD-ROM in the Bios by setting configuration as second CD-ROM
Try software on Power DVD
Ref:Q188115

by craig haunch

goto the knowledge base on microsoft.com then choose article q159560. This tells you everything about testing DMA on the drive and the controller it is connected to as that might not support it. I would put it all down here but there is too much but the bottom line of it is either your drive or controller doens't support DMA.

Cheers

by maz1980

First activate DMA and IDE Bus Master in BIOS setting. If it doesn't help. Go to you PC manufacturer's web site then download drivers for your IDE controller.

Thanks

This discussion is closed to new replies.