Discussion Locked

DNS and Weird icon

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello all,

I have 2 questions that are puzzling me,

1. Is it possible to setup a backup domain controller to backup WINS, DHCP and DNS? Do the WINS and DNS have databases can be replicated. Not sure about DHCP. I am running NT 4 with service pack 5 installed.

2. In the DHCP manager, when I look at the IP addresses in the active leases, there are icons of computers in the list with IP addresses assoicated with them. Most of our laptop users have a little yellow telephone icon on top of the computer. What does that icon mean? Sometimes these laptop users have several IP's but after pinging them, they are not in use. Whats the deal with that? Anyone know? please help...thanks

Andrew

5 replies

by raffi_

I can answer most of your questions:

1. WINS backup - sure ya' can. Look in the on-line help docs for WINS replication an PUSH/PULL partners.

1a. DHCP - I don't know for sure if there is a failover routine but here is a workaround if you are on a private sub-net:
Set up 2 DHCP services each with a valid - but different - range. All other parameters the same. Both should start responding to requests with vaild #'s but if one fails the other carries on.

1b. DNS - this is the stated function of the secondary (or slave) DNS server. You're supposed to have two. The slave gets updated from the master.

2. The little yellow" icon signifies that the RAS service owns/has allocated these numbers. RAS does not know how many IP's will be needed so allocates a number - I cannot remember the formula for how it calc's the number.

Your RAS/DHCP is not releasing the allocated IP's quickly enough and/or your users are dialing in with multiple profiles/from different locations. That is why they are showing as allocated but not responding to a ping.

Regards
Raffi_

by pan 13 x

win and dns can both be configured to do replication.
wins: open wins manager and select the pdc server, right click on the server and select replication partner. there you can add the bdc for replication. configured if for replication: push andPull
Dns: start the dns on the BDC install the zones you want replicated as slaves. you will be asked to give the master ip for replication.
DCHP can not really be replicated: but if you want a fell Save then start the dhcp service on the BDC:configured the server the exact same as the bdc. Stop the services and configure it not to startup auto. If something happens to the pdc or if DHCP fails on the PDC, stop the service there and start the BDC service:

the Icon in the wins manager is from ras/dailup users DHCP doesn't know how to correctly release these IP address and that is why there are so many active IP's set for the same computer. If you are using DCHP to handle out IP address for ras , You may want to consider letting ras hand out the ip address and exclude a block or ip address in dhcp and let ras assign these ip address.

This discussion is closed to new replies.