Discussion Locked

DNS Client problem

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a W2K Web server in a DMZ that is fairly locked down. TCP/IP filtering is enabled among other things. Now I want the server to use DNS. I started the DNS Client Service and opened UDP Port 53. Names are not getting resolved. A packet capture with Network Monitor shows that the DNS request goes out and the answer comes back, but the server is either not accepting it or not using it. Anything obvious that needs to be enabled to get this working?

Thanks,
Matt

4 replies

by techdictator

I had assumed you were using a firewall. Is port 53 open on the firewall? Sounds like it is since you're seeing the request and the reply come back. I would not do any filtering on the server in question. I would do all the filtering on your firewall. Incidentally, what service pack are you running? You may want to consider using SP2.

by mronn

TCP Port 53 is enabled. Still no luck.
More info:
Under TCP/IP Filtering I have selected "IP Protocols - Permit Only" with nothing in the selection box. This worked fine for web services. Perhaps this is messing with DNS?

This discussion is closed to new replies.