Discussion Locked

dns configurations

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a windows 2000 advance server
supporting four windows 2000 professional
work stations. At this moment these work
stations are unable to access the server or
log onto it using any of the profiles. The
error message i get when I try to logon is
unable to find RPC and unable to find DNS
server. The work stations are unable to use
the resources of the server for printing or
any other service.
I was told that the DNS needs reconfiguring
How can I reconfigure a DNS on windows 2000.
Can you give me a step by step procedure?

5 replies

by estebandelatorre

1.- Choose a w2k server to be used for dns name resolution.
2.-Write don it's ip address.
3.-Install dns software in it from windows components options.
3.5.- Denife the start of authority (define here your domain name, such as mydomian.com
4.- Create an A record for each machine, (like server1.mydomain.com) followed by it's ip address.
5.- Configure the ip (from step 2) into every pc under tcp ip properties, dns tab, OR modify your dhcp server in order to deliver the dns resolution order along with the ip address.
6.- Check if it is working, ping macjines by ip address and then by name (like ping server1)
If you see a response, it's working.
It's a 10 minutes basic setup.!

Hope it helps!!

This discussion is closed to new replies.