36 replies
by pcguru09 Accepted solution
by oh smeg Accepted solution
But then again it could just as easily be the Power Supply which is killing the M'Board.
Both of those are cheap items and both could be causing this to happen.
You can try reducing the unit to the least that will run the computer so 1 RAM Module no HDD no Optical Drive and just the Monitor, Keyboard and Mouse connected and see if that does anything different.
If you can get to the POST Screen reattach the Optical Drive and fit something like the Ultimate Boot CD to perform some Diagnostics it's available free here
http://www.ultimatebootcd.com/download.html
Just remember click on the ISO Download not the add on the web page. ;)
If you can not get a POST Screen to appear I would try changing the Power Supply with a Known Good one. Of course if the M'Board is toast it could destroy the replacement power supply.
Of course if you can not get any POST Screen to appear remove all but the CPU and then try powering on and see if the Error Beeps that the M'Board gives out correspond with the No RAM message. If that doesn't work at that stage change the M'Board.
Col
by popova71 Accepted solution
1. No fans, no nothing:
Problem with PSU 100%
2. Fans work, no display, no HDD activity LED, no beeps
MB problem in 90%, try flashing BIOS, check for loose connections on power supply connectors - and be ready to buy new MB. Dead MB does not give you beeps.
3. Fans work, no display, HDD activity LED turned on (not blinking) , no beeps
In 90% memory related problem - defective memory card, slot on MB, wrong type of RAM - try using another slot in MB, another memory (in every slot), if there are multiple memory cards take all out but one. Most MB does not give you beeps when RAM not installed (or dead RAM). Try those RAM modules in working MB. If RAM is OK - MB is in fault, probably...
4. Fans work, no display, HDD activity present (or not), beeps a beeping
You got lucky.... Listen to the beeps, how many long, short beeps, google it. Yeah, beeps will tell you if it is VGA, CPU or something else problem
5. Fans work, got stuck on POST screen only, can (or can not) enter BIOS settings, resetting (or not)
This one is not easy... Bad, but still working PSU; or CPU overheating (bad contact with cooler); or bad CPU; or bad MB; or defective RAM; or bad BIOS. Try clearing BIOS.
For full low-tech MB troubleshooting you will need (from some working system):
1. PSU (so you could eliminate PSU problem)
2. RAM (so you could eliminate RAM problem)
3. VGA (so you could eliminate VGA problem)
4. CPU contact paste - this one you must buy
Whatever you do, first disconnect everything not necessary: HDD-s, PCI cards, USB thingies...
Good luck
by pcguru09 Accepted solution
MORNING THANK YOU FOR YOUR REPLY
OF THE CHOICES YOU GAVE ME NUMBER 2 IS THE ONE THAT IS THE PROBLEM,
ANY IDEA AS TO WHY THIS SYSTEM KEEPS BLOWING MB THIS IS THE 3RD ON WITHIN 2 YEARS
by seanferd Accepted solution
Then I suspect the power is very "dirty" at the location where this system is used (assuming it isn't an environmental problem like dust, smoke, heat, or humidity). The system should be using some sort of power filter, like a UPS battery backup.
Could be that the PSU is the problem. If it is bad, it could be damaging the board.
Could be that the boards are horribly defective by nature as well. It happens.
by cg it Accepted solution
every time.
While overclocking has a cool factor, usually ends up costly. If you don't overclock, I would look at heat related issues. Heat is a computers worst enemy.
by popova71 Accepted solution
@pcguru09
There can be several reasons for repeating MB failure, maybe poor engineering on that particular model? Are there any addons, PCI cards, modems, TV/FM cards, USB junk?
PSU is first suspect, but power supply (from cheap or defective extension cords) can cause damage, but usually on PSU itself. Is PSU working? Working fans means that 12V is present, but what about 5V an 3V3 channel?
by pcguru09 Accepted solution
HI THANKS THERE IS NO ADDONS EVERYTHING IS BUILT IN TO MB
I CHANGED OUT THE POWER CORD DIDN'T DO ANYTHING ONLY THE
FANS, POWER LIGHT ON BACK AND FRONT WORK BUT NO AMBER LIGHT FROM HD AND NO MONITOR ACTIVITY AND NO BEEPS
by pfkthorin Accepted solution
by pcguru09 Accepted solution
by spitfire_sysop Accepted solution
What the hell is wrong with you? Is your CAPSLOCK broken too?
Yes the motherboard is the problem. It was made by Foxconn. Buy a new motherboard from any other vendor. Connect this PC to a UPS before you power it up next time. This will protect your PSU and MB from further damage. You may find that the PSU is eating MBs for lunch. They do that.
by cmiller5400 Accepted solution
by wysetech2000 Accepted solution
Without a digital voltmeter to test the power supply it's really hard to make an accurate diagnosis. We know that one 12v rail in the PSU is working because the fans work. If the MB is not being powerd up you will have the problem you describe. If all powers are present then the sure bet is a bad motherboard. Inspect the board for burn marks and or swollen capacitors. Sometimes these are a clue as to the condition of the motherboard. A bad CPU is another possibilty but not likely.
The MB in brand name computers is the cheapest crap they can possibly buy, so if it is in fact the MB it's no real surprise.
If you determine that the problem is the MB i would choose a different brand. I have great luck with Asus boards. Install a new power supply and purchase a Back-up Power Supply. Power surges are very hard on all computer components.
by pcguru09 Accepted solution
by pcguru09 Accepted solution
by pcguru09 Accepted solution
by pcguru09 Accepted solution
by pcguru09 Accepted solution
by pcguru09 Accepted solution
by pcguru09 Accepted solution
by pcguru09 Accepted solution
by pcguru09 Accepted solution
by pcguru09 Accepted solution
by pcguru09 Accepted solution
by pcguru09 Accepted solution
by pcguru09 Accepted solution
by john_graef Accepted solution
Is the case dirty inside?
Did the client attempt to update the bios?
You observe no POST right? Any sign of capacitor problems?
Try connecting the keyboard, power it on, wait 30 seconds, see if caps-lock light works with key.
Try OH smegs post above.
I'm not trying to be mean, but this may be above your head, and the most economical (in terms of time and money) way to fix it is replace the mobo. That's an Intel Dual-core Pentium right? Probably socket 775?
by pcguru09 Accepted solution
by popova71 Accepted solution
I agree on this.
Troubleshooting MB is 15 min. process max (if you got everything ready, including PSU tester). Anything longer - not worth the time and effort.
by cg it Accepted solution
nobody repairs computer hardware because the labor cost to fix it far exceeds the cost to simply replace the component. No one repairs TVs, DVD players, or any electronic component for the same reason.
If anyone asks is my motherboard bad? is my power supply bad, my DVD bad, my hard drive bad, my processor bad, my memory bad, my lights ont he case bad, network card bad, sound card bad, monitor bad, the pat answer should be yes, go buy a new one. and that's that.
if they whim about not able to afford a new one... their just trolls, looking for people who will answer stupid questions for a laugh....
by wysetech2000 Accepted solution
I'm all for learning projects,that's partly how i learned the the things i know. You could probably purchase a new PSU for the price of a voltmeter but if that's not the problem you either need to keep going or accept your loss of $ spent.
It's real easy to spend someone elses money CG IT, to buy a new computer. There is no sense of accomplishment in doing that however.
by cg it Accepted solution
back in the days when computers were expensive, repairing components made sense. Not today, when you can buy a desktop that comes with processor, memory, hard drive, DVD drive, power supply, and a case for as little as $350.00
With very little effort, and an internet connection, one can find dozens of articles on web sites devoted to computer hardware. Tom's Hardware is a web site devoted to computer hardware as well as the computer hardware manufacturer's web site.
So when someone comes onto a site like TechRepublic, and asks a question such as this, when they are trying to repair someone else's computer, I'm tend to wonder why they are trying to repair someone else's computer when they seemed to have very little experience at it, by asking a question on a public site that isn't really about repairing computer hardware.
by esmcochoa Accepted solution
The one thing you can try that I have not seen in the posts is: Remove the motherboard completely from the case. Place it in a non-conductive surface. Attach all basic components and see if the PC will boot completely. If the MB functions as expected, then you can consider that grounding the motherboard to the PC case may be the main issue you are having. You may have considered this already, but do a google search for ratings of the same PC with similar specs t o verify of other people are having this same issue. It could ultimately be a lost cause.
Last but not least. Consider a new comparable tower for your client and cut their losses. ..Sorry to hear you are having so much trouble.
by evolve electronics Accepted solution
by pdelaguardia87 Accepted solution
Hey try grabbing a multimeter that shows you the voltage, believe me ive seen my share of multimeters with just one led. And set it to AC 120V or the closest value. If you are in the US and you are facing the power outlet follow this instructions.
1- Put the red (hot) cable into the slot on the right and the black (neutral) cable on the slot to the if you read voltage between 108v and 132v you are good.
2- Put the red (hot) cable into the slot on the right and the black one on the bottom one thats the ground if you read the same as in step 1. then you are good.
3- now put the black cable in the left slot and the red one on the ground slot the one in the bottom. In this case the only value you should get is 0.
In the case your readings are not the ones i told you well my friend you have a busted outlet, contact an electrician to fix it or better yet plug the pc on another outlet.
Bad voltage can lead to a busted PSU and therefore a busted MB and all the like.
by pdelaguardia87 Accepted solution
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending