Discussion Locked

DOS login to NT4 WORKSTATION

0 helpful
14 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Does anyone know how to get a DOS workstation to login to an NT 4 WORKSTATION.
If the technique is to use the setup proceedure for clients from the NT SERVER CD, what changes should be made to the protocol.ini, login scripts, etc to get this to happen?

I've tried for some time to do this with no success - nobody else seems to know how this is done, either.

All suggestions welcome.
Thanks.

14 replies

by simonc

It cannot be done.

You need to have an NT domain to logon to then you can connect to the NT workstation shares etc.

by beyond

To further clarify, a user can only be validated on a domain controller (PDC-BDC). A workstation can not validate a user to access the doamin.

by rwscc

If your NT workstation is a member of a workgroup, then you can accomplish the task using the old "DOS connection for WFWG." I think it may use the same files as the DOS client on the NT Server CD. However the setup in the DOScfWFWG was designed fora peer to peer network. If you use TCPIP you will need an lmhosts file to resolve netbios names. I would recommend IPX for simple yet robust connectivity in a peer to peer environment. The "net" commands needed to connect are documented in the DOScfWFWG book, or in the Resource Kit for WFWG.

by beyond

Greg's question reads like a MCSE exam question. You have to look at what is being asked. Can a workstation logon to another workstation? No. In a peer - to - peer environment you can only logon to the local machine you are physically sitting at. The local machine validates the user from the local account and the user then has access to any shared resources from the other computers on the network. In a domain, you must have a domain controller (PDC) and validation takes place on the PDC or the backup domain controller. Either way, a workstation can not "logon" to another workstation for a workstation can not validate users in a domain nor does it validate logons from other computers in a peer - to - peer environmaent.

by ?*greg.powell

Fixed - a local computing officer gave me a copy of a BOOT disk he made using the MS client files from : ftp://ftp.microsoft.com/bussys/Clients/MSCLIENT/
He used the IPX login. I tried it AND IT WORKS ! Stand-alone NT workstation can be logged ontovia a DOS PC. I can map drives, copy files or (main reason for login) perform Ghosting to the DOS PC using a Ghost image file saved on the NT Workstation.
IT CAN BE DONE !

This discussion is closed to new replies.