Discussion Locked

Dual Boot

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
How do I create a dual boot machine from my new harddrive with Windows 2000 Professional and Windows 95?

7 replies

by ð

Install windows 95 as you nomally would. Then install win 2000, do not upgrade install a fresh copy and do not convert drive to NTFS. win 2000 will automatic create a dual boot menu on start up.

by malcolmny

I did this with Win2k Adv Server and Win 98 on my own machine at home. What you may want to do is fdisk from dos first, so you can have two seperate partitions. this way you can take advantage of NTFS in Win2k. I did this with my machine at home,using 98 and Adv. Server. I know that with 98, you must install it first, or it will install over your 2000. You can format this partition, the one for 95, with either FAT, 2000 can see this. Once you have 95 set up, do a clean install of 2000, and you will be given the opportunity to choose which partition to install it on. You will then be able to choose which file system to format with. Remember that with 2000 formatted as NTFS, 95 will not see it. 95 will be accessible from 2000, but 2000 will not be accessible from 95. If this works for you, format with NTFS so you can play with the permissions and security. You will learn a lot more. Good luck, and let me know how it goes!

by gbhall

Answer 1 certainly works, as do other methods such as installing a dual-boot utility such as System Commander. I have both methods available, because I also like to book into 'real ole DOS' on occasion.

A point of particular interest to you may be the dual use of installed applications. In many or most cases you do NOT have to install a completely separate copy of an application. Of course for this to work you probably should not format your Win2K partition as NTFS as you may want to access details later from Win98 too.

What you generally do is re-install an application in Win2K, but point it to the originally installed location you used in Win95/98. This over-writes the original installation files and (crucially) prepares new Registry entries for Win2k to use. You will usually have to re-set personal options in BOTH Win98 and Win2K so be SURE to note down what they are in the original copy first !!!

I found a problem, however, with compiled help (.CHP) files, as Microsoft in it's God-awful wisdom appears to have changed the format of these between Windows versions. So a very new application may not have a successful outcome. Anything two years old or so should be just fine, however.

This discussion is closed to new replies.