7 replies
by c_saso
The easist way is to have have Win95 or 98 installed then create a seperate partition to install NT/2000. If you have 2 seperate drives, remove the NT/2000 drive, then install Win95 or 98 on the other drive.Set the Win95/98 drive as your master and the NT/2000 drive as slave.
HTH
by s_tabak
Yes I do have 2 physical hard drives and set up win 95 on the master but it boots to win 95 it does not load the nt loader. If i set it in the bios to boot from the slave it will load the nt loader.
What do I need to set up in Win 2000 that it should load win 95?
by bjwyatt_1999
by s_tabak
by s_tabak
Thanks everybody! I figured it out myself.
The way to do it is...(on 2 separate HD's)
1) Create an emergency startup disk from NT or Win2000.
2) Unplug the NT/2000 hard drive, install win95 or 98 regularly when everything works plug back in the NT/2000 drive.
3) Run the NT or 2000 setup again and select repair (Warning:) Make sure to select the "NT Boot Sector" ONLY. (Note: This will create a file bootsect.dos in your Win95 c:\ directory.)
4) Boot to NT/2000 (Note: You can also do so by selecting it in the BIOS).
5) Copy 3 files from your NT/2000 root directory 1) Boot.ini 2) Ntldr 3)Ntdetect.com
6) Edit the Boot.ini file that's under the Win95 directory not the one that's under the root directory in NT/2000 and add (another line) c:\="Windows 95" make sure to include the quotes and on the line that has Windows NT 4.0 and/or Windows 2000 change rdisk(0) to rdisk(1)
7) Reboot and set the bios to boot from Windows 95 Hard drive.
Everything should work and you should get the menu and select any OS.
by s_tabak
Correction for line 5:
5) Copy the 3 files into the windows 95 drive into c:\
by s_tabak
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending