Try reposting this in the 'Q&A' forum. The 'Discussion' forum is for matters of general discussion, not specific problems in search of a solution. The 'Water Cooler' is for non-technical discussions. You can submit a question to 'Q&A' here:
https://www.techrepublic.com/forum/questions/post?tag=mantle_skin;content
There are TR members who specifically seek out problems in need of a solution. Although there is some overlap between the forums, you'll find more of those members in 'Q&A' than in 'Discussions' or 'Water Cooler'.
Be sure to use the voting buttons to provide your feedback. Voting a '+' does not necessarily mean that a given response contained the complete solution to your problem, but that it served to guide you toward it. This is intended to serve as an aid to those who may in the future have a problem similar to yours. If they have a ready source of reference available, perhaps won't need to repeat questions previously asked and answered. If a post did contain the solution to your problem, you can also close the question by marking the helpful post as "The Answer".
[b]Not really sure how that could work[/b] If BIOS could only see 4 GIG I'm at a loss how Windows could see 8 Gig and more importantly unless it was a 64 Bit System how it could use anymore than somewhere around the 3.25 GIG upper Limit of every 32 Bit System though the 32 Bit Vista Systems and I suppose 7 OS lie tot he user about what is available.
Also more than a bit of a loss how you would have fitted the RAM into Bank 0 or 1 and have it work in Dual Chanel Mode but this I would say depends on the M'Board in use in this particular occasion. With Normal Dual Chanel M'Boards you have Paired Sockets which are generally colour coded so you place the RAM into the Yellow or whatever colour RAM Socket that is fitted and leave the other which is generally Black unpopulated. In Theory you could fit the RAM into both Black Sockets and leave the Coloured Sockets unpopulated and it would work in Dual Chanel Mode though depending on the MBOARD and the Chip Set involved this may not work in a lot of cases.
As for swapping the RAM from Socket 2 to 0 and from Socket 0 to 2 all that should do is clean the contact Points in the RAM Sockets and on the Modules which may allow the RAM to work properly when they are refitted. But it would be just as possible that removing and refitting the RAM Modules into the same Sockets would have the same effect.
Col