Discussion Locked

Dual graphics cards in Win2k Pro

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I've got an ATI Rage Pro LT in my AGP slot, going into an Axion CL1999 monitor and it's working happily. I've tried to install a SiS 6326 card into a PCI slot but I'm having no luck at all. The problem is that it's displaying nothing at all on the second monitor (through the SiS card) even when set to 640x480.

With the built-in Win2K drivers, the drivers that came on the CD and the latest drivers from SiS, Win2k locks up just as it gets to the logon screen.

As always, any help would be appreciated.

5 replies

by curacao_dejavu

Hi, Can you verify if you followed the following steps described by the MS KB Article ID: Q238886.
Also there are some issues with ATI cards.

Leopold

by foss

I checked that one, and it appears that MS haven't certified the drivers for the Sis card. Thanks :)

by dmiles

In your configuration,under Win2k the PCI card will need to be setup as your primary card
If the SIS video adapter has S3 chip it is noted problem that you can try working around by using it as the primary
The ATI card that you are using has a problem being used as a secondary video card in WIN 2K
Ref:microsoft knowledgebase article Q199948
and Windows 2000 Hardware Compatibility List
ref:www.microsoft.com/support/kb/Q131/3/03
You seem to have two cards that are not compatible to setup inWin 2K

This discussion is closed to new replies.