Question Locked

Dying Hard Drive

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Dell Dimension 8200 that's about 5 years old. I recently have not been able to defrag the hard drive (original drive, Maxtor). It blue screens stating IRQL not less or equal.

Ran Dell diagnostic tools. Ran all the hard drive tests.

Drive specs:

ATA
Maxtor 6L080L4
Firmware A93.0500
LBA Supported ? Yes
UDMA Supported ? Yes
Block Size ? 512
Total Blocks ? 156355584
Total Capacity ? 80054MB

During the Read Test got the following error:

Error Code 0F00:2044
Msg Block 123394980 Uncorrectable Error

During the Verify Test got the following error:

Error Code 0F00.1A44
Msg Block 123394980 Uncorrectable Error

Also ran Seagate?s SeaTools for Windows (Seagate bought Maxtor, and this is the program they recommended running). Got a failure message after running the Long Drive Self Test.

So, is it time for a new hard drive? Any advice would be greatly appreciated.

6 replies

by mjd420nova

It could still be usable, but you need to get your data off first, then run a write diagnostic on it to identify the bad sectors. Mark the bad sectors, reformat and reload the OS. Keep a close eye on it for another couple days, if it acts up again, replace it.

by cg it

from mjd420nova

but with HDD prices these days, I'd suggest getting the data off, then just get a new drive. Marking bad sectors just tells the comp not to write to that sector or block. Doesn't solve why there are bad blocks or other blocks going bad.

by ashishs

I don't know if this will help or not, but I have done this on PCs where I got a blue screen of death or missing/corrupt file. I have done this on XP & Win2K machines. Put in the OS disk that came with the PC. Choose repair option and when you are presented with the 2 repair options, pick the first option. Can't remember the exact wordings for it but the second one is something like using repair disk. Don't use the repair disk option. After you select the first option, you'll be asked which OS you would like to repair/log into? Type 1. Then at the next command, type chkdsk -r.
Like I said, it might or might not fix your issue, but worth a try. I have done this on Dell machines only.
Good Luck.

by wthkah

Thanks for the suggestion. I already tried this and is still blue screening.

This discussion is closed to new replies.