Question Locked

Email Port Blocked.

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We are having this problem with only on section of our network which unfortunately is a workgroup. This section of the network goes from our firewall to a fiber converter to a netgear 16 port unmanaged switch to another fiber conver to linksys 24 port unmanaged switch and from there to part of the computers that are having this problem and the other set of computers are off of another switch from that switch.

My problem is that when you click the send receive button in outlook, incredimail, or thunderbird we have to change the ports from 110 for pop3 and 80 for the smtp to the ssl ports of 995 for pop3 and 25 for smtp.

reformating a computer will not effect the problem, nor running worm removal tools or antivirus software and anti spyware either.

If anyone has any suggestions on this puzzle please let me know.

Thank you for your help!

Jimmy Jergins
jjergins@wilsonelectronics.com

6 replies

by retro77

Port 110 for POP3 and 25 for SMTP. Port 80 is HTTP.

Also, rule out the client software by going to a command prompt and telneting on port 110 and port 25 to your mail server

ex: telnet x.x.x.x 25
ex2: telnet x.x.x.x 110

by jim.jergins

I have done that about two weeks ago, and it is successful.

I also know that port 80 is HTTP, however our e-mail provider uses port 80 for out going mail. Don't mean to sound rude, but the settings that are our normal are 110 for pop3 and 80 for smtp.

Once i have telnetted to my e-mail server on both ports 110 and 80, what is your next step? Because that works, but doesnt cure my problem.

Like I said, I have narrowed it down to a one section of my network. Could this be one of my switches or a fiber converter?

Thank you for your input.

by retro77

To rule out switches and fiber converters, refer to the OSI model. Those operate at layer 2 and your problem is well about that.

Next step: troubleshoot layer 3 to see if you can route from that problem network to a good part of your network. It could be a bridge or something that is misconfigured.

by jim.jergins

I made a patch cable and ran it from the very first switch the signal gets to in this other building that i am having this problem, to on of the computer which have this port problem the most. Then I switched out the other two switches after that first switch with brand new switches, right out of the box.

Was this something that could work for ruling out those switches and fiber converters?

I will make a post on Monday August 27 evening stating if that was the fix.
Thank You!

by jim.jergins

The computer that I hooked up from the first switch with it's own patch cable has had no more problems. The other group of computers still have the problem even with those new switches, so the only possible solution at this point is the two fiber converters between the first switch and the other group of computers.

Thank you for your help.

This discussion is closed to new replies.