Question Locked

Error Code 0000009C HHEEELLLLPPPPP!!!!!

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I've been having random blue screens for about a month or so. I thought it was memory, replaced it no help; I thought it was windows, reinstalled no help; replaced hard drive/format/fresh install, now I only get the following periodically;

Error code 0000009C with Parameter1 00000001, Parameter2 8054d570, Parameter3 b2000000, Parameter4 00000115 for the past couple days.

I replaced power supply, no help; removed all boards and drive\s, except HD and no help. I'm down to the mother board and CPU. Any ideas?

6 replies

by hal 9000

Like the Ultimate Boot CD available for download here

http://tinyurl.com/3jnpy

Or if you want a quick & east test try a Live Linux which runs off a CD/DVD depending on the version chosen. For most Windows Installations Knoppix will be your best option as it can read Windows Partitions and be used to fix problems down the track if necessary. If the system loads of the CD and runs OK you know that you have a software problem. If it fails to load it will stop and tell you what it was trying to start when it fails so you'll know pretty much straight away what's wrong.

You can buy a copy of any Linux Mag at your Local Newsagent with a cover CD on it or download one of the many Live CD from here

http://tinyurl.com/23nmq

Col

by mjd420nova

This error code is low enough to be memory, and it sounds intermittent, that's why it's so hard to find. If you can run a looping memory test you might catch it. Most often caused by lose connections on the board edge of the memory cards, most likely the first bank.

by rsoly777

This is a hardware issue: an unrecoverable hardware error has occurred. The parameters have different meanings depending on what type of CPU you have but, while diagnostic, rarely lead to a clear solution. Most commonly it results from overheating, from failed hardware (RAM, CPU, hardware bus, power supply, etc.), or from pushing hardware beyond its capabilities (e.g., overclocking a CPU). Install a utility that monitors the CPU temp. There may be a utility that came with your motherboard

Also You might consider your video card Try swapping with another video card it may be a memory issue with the video.

This discussion is closed to new replies.