Windows Forum

Ask something
Discussion Locked

errors in event log

0 helpful
4 replies

by kn_abhilash

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,

i have a compaq ML370 Server in which Windows NT4 workstation is loaded

last week i restarted the machine once after that its throwing an error in event viwer-system log

Event id : 15
source:atapi
Type : error
Category : None
Description:
The device, \Device\ScsiPort0, is not ready for accees yet
-----
this error repeats in every 20 seconds

why its happening so, pls help

Thanks

4 replies

by jim brown

I would:

1. Check all the connections to the SCSI devices (reseat all the connections)

2. Restart the system.

If the error is still there, try replacing the components or reinstalling the device drivers.

by rindi1

your CD Rom Drive may have a problem. Remove any CD from the drive and restart your system. Check if the error still occurs.

by skitzizzy

Unlikely, but do a chkdsk on your boot volume as well. If thats got errors, you'd know by now though. . .

by house

This type of error is common on a failed device (physical). Double check your scsi configuration, pull out and reset all connections, get updated firmware.

This discussion is closed to new replies.