Discussion Locked

Event ID: 7026 error on boot-up

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am receiving the following error, and was unable to find a resolution on MS Technet, anyone else seen this one -

Event ID: 7026
Source: Server Control Manager
Type: Error
Category: None
The following boot-start or system-start driver(s) failed to load:
ppa3nt

I have no idea what app ppa3nt belongs to.
Anyone have any suggestions?

6 replies

by maxwell edison

From: PSS ID Number: Q166393

SYMPTOMS
========

When you are using the Iomega Parallel Port Zip Drive drivers version 1.41,
Windows NT may hang or display a "STOP 0x1E" error message at startup.

CAUSE
=====

The drive is not connected to the parallel port.

RESOLUTION
==========

To correct this behavior, use one of the following methods.

Method 1
--------

1. In Control Panel, double-click Devices.

2. In the list of devices, click PPA3NT.

3. Click Startup, and then set the device to Manual. Manually start the PPA3NT
device by repeating steps 1-2 and clicking Start to load the driver when the
drive is connected.

Method 2
--------

1. In Control Panel, double-click Devices.

2. In the list of devices, click PPA3NT.

3. Click Startup and then set the device to Disabled. When the drive is
connected, set the device to Boot.

Method 3
--------

Contact the manufacturer for a possible updated driver.

MORE INFORMATION
================

Good Luck,

Max

This discussion is closed to new replies.