Discussion Locked

Event Log - Security Auditing

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We setup our NT4 server to audit logon/logoff via the Event Logging and we found that an NT4 workstation that is left logged on overnight is logging on/off every 5 min overnite when the office is closed, what could be causing this? are there settings in NT that is causing the security event logs (ID 528 and ID 538)?

12 replies

by magetower

The culprit is mapped resources. Whenever a user accesses a shared resource it has to authenticate with the system providing the resource. This will create logon/logoff entries for each initial connection to the system. If no activity occures after a specified time the connection is dropped. However since the user is still logged into the workstation there is probably processes that refresh the mapped resources causing another authentication with the server. Pay particular attention to programsstill running on the workstation (like Windows Explorer) that periodically check for changes to mapped resources.

by mckaytech

Events 528 and 538 are those associated with a normal log-on and log-off (interactive) from the console. Within the Event log message, there should be more detail about the user id and process and that might give you a clue as to what is causing this.

I've only seen something similar once and it turned out to be a "keep-alive" program that was designed to ping a dialup Internet connection at least every 5 minutes to keep the connection up.

Is there anything in the other logs (System and Application) to suggest what might be going on? Or on the Event log on the workstation?

paul

by lastsurvivor

What is causing the logging is that you could have other resources logging into this machine or making net use to these machines look at the detail and the information below to determine if the connection is a network or interactive logon. Hope thishelps it at least tells you to look for a local or network logon.

Interactive logon Event ID 528 Type 2
Interactive logoff Event ID 538 Type 2
Network logon Event ID 528 Type 3
Net Use connection Event ID 528 Type 3
Network logoff Event ID 538 Type 3
Net use disconnection Event ID 538 Type 3
Autodisconnect Event ID 538 Type 3

by whitepatch

Thanks to everyone who responded. But here's an update. We looked into running apps/processes and shut them down but we went further. This time user1 (user in question) was logged on onto station2 while a test user was logged on onto user1's station overnite. The outcome is user1 still has logon/logoff entries overnite while none for the test user. With this information, we are assuming that the entries are profile related. Where do we go from there? We'll check user1's profile file. Also, is there a registry settings for logon/logoffs?

by dlw6

Check for mapped resources in user1's profile. Also check for mapped resources in the All_Users profile.

Don

This discussion is closed to new replies.