Discussion Locked

Exchane 5.5 cant send internet mail

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have exchange 5.5 on an NT server. Users are also on NT using outlook 98. Suddenly my users can't send email to the internet. For example,I can't send mail to hotmail. The internet itself works fine but we can't send email to outside internet mailboxes.

Any ideas

9 replies

by kep 001

The mail service bundled with Microsoft Internet Explorer is Outlook Express. This will be a two step check:

Go into Outlook Express (as if you were checking for mail) and select tools / accounts / mail. Make a note of which service is your default ISP.

Now select New for a new message. On this screen look at the "from" line and see if the ISP after the name is the same as your default above. (If you are using "OUTLOOK" this information is under view / options in the new message window.) Usually these two need to be the same. If they are different click on the arrow to the right of the "From" line and see if the default ISP is a selection. If it is select it and see if you can now send e-mail. If it is not see if you can alter the default account in the OE tools section described above.

Once that you verrify that it is working you need to establish which ISP you wish to be working through and set that as your default and enable it in your messaging software. Frankly, I suspect that the default account (in the second paragraph above)was inadvertantly changed.

Kep

by tgeairn

Let's start by verifying the SMTP (IMC) service is functioning. From a client, telnet to the mail server on port 25 (from a 2000 client "Telnet servername 25". You should see something like "220 servername ESMTP Server... blah blah".
If you get that:
Type "HELO"... Get "250 OK"
Type "MAIL FROM:myname@mydomain.com"... Get "250 OK..."
Type "RCPT TO:myname@mydomain.com"... Get "250 OK..."
Type "DATA"... Get "354 Send Data...."
Type "This is a text"
Type "." (Carriage return,period, carriage return"... Get "250 OK"
Type "QUIT"... Get "221 closing connection"

Let me know what you get. If you use your email in the from and to, you should get a blank email with "This is a text" in the message header.
-t

by khahina

Verify, you have enough space on your disk .

I had this problem and this silly software don't let mails go out (that will done it less bigger) when it have not enough space (10 Mo at least, if i remember well, on each disk concern by Exchange files).
Use the assistant to rearrange your files on different disk. Or delete some old archive mail file.

Courage, (because Exchange is very dummy indeed ;) )

by jbutcher

I am sure that you already checked this, but just in case.

On your Exchange Server, Open up Services and scroll down to your Microsoft Exchange Section. Make sure all of the services are started.

Also check your Event Log to see if a Service was stopped with an error code.

Try restarting the services.

This discussion is closed to new replies.