Discussion Locked

exchange 5.5 srvr support 2 domains?

0 helpful
11 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Is it possible for a single Exchange 5.5 server support two different domains?
How can I make it so?

11 replies

by techrepublic

Exchange Server 5.5 can't be supported on two domains on one computer. What you can do is set up two exchange servers with two sites and set them to work together. I have done it before it can get a bit messy. If you do this OWA may have a bigger problem working.
Please fell free to contact me via email at wallytech@mindspring.com for more help or for me to explain anything further with you

by frobo

Hi,

the Question is not clear enaugh!

1.) Can Exchange Server 5.5 support diffrent Windows NT Domain's without any Trust?
The Anwser is: maybe! It depends on your Situation U have, and your possibilty's to implement any Changes.

2.) Can Exchange Server 5.5 support diffrent E-Mail Domains ? YES !

This Anwsers give's not any Solution to your Problem, i know that. however, paint your Picture of the Situation clear enaugh, so we can help.

regards

Frobo

by azizhakim

I have a home project which i am studying for
prior to my Exchange Test.Your question is exactly what i did when i first installed exchange.The answer to your question is Yes you can.to accomplish it. Your domains have to be physically connected.The same idea as
using a site connector to link two sites requires Lan link,whereas in our case we are eliminating the other site & its link since there is one server.Necesary trusts need to be established for verification to the server.I hope it helped although my setup is at home & not a real enviroment but i was successful with what your question asked.

by shmaltz

NT Domains or Internet Domains?
For NT Domains you just have to create the trusts and its going to work even if you only have one Exchange server. You do that by choosing the domain\username format when you apply the default account with permission.
For Internet Domains the answer is again yes. You do that in the IMS configuration panel. Open it up and choose the Routing tab and add the new domain name, and should accept as inbound. Or if you want your users to receive email for the domain with thier old alias (i.e. domain1.com is your old domain, domain2.com is your new domain, if you want every one from domain1.com to receive email thats addressed to domain2.com without changing any sttings) add your domain in the routing tab and set it to should be rerouted to this domain and enter your old domain. If you go with the first way (inbound) than you will have to add an additional smtp address for each user that will need an email address in the new domain (you can use import for that) otherwise the sender will get a no delivery report. With the second way however you dont have to this b/c joe@domain2.com is the same as joe@domain1.com.

by bhrdwh

Hi,
you need to have two way trust relationship for both the domains. I've done it & works fine using one single Exahange 5.5 server.
Akash

This discussion is closed to new replies.