Discussion Locked

Explorer caused an invalid page fault

0 helpful
12 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Every time I boot up my PC when windows starts. I get the "Explorer caused an invalid page fault in module unknown at 0000:1000240.
Registers:
EAX=000028cf cs=017f EIP=10002440 EFLGS=00010246 EBX=005ffe80 ESP=005ffe28 EBP=005ffe64 ECX=c169d620 DS=0187 ESI=00008ec0 FS=28af EDX=00016ce4 ES=0187 EDI=005f0000 GS=0000 Bytes at CS: EIP:

error message?
I looke at micrsofts support page and they dont have any thing certain that can resolve this.
Any ideas or tips would be appreciated.

thanks

12 replies

by j72571

Before you do anything, your best bet is to reinstall the O/S. You will not lose any critical data on your hard drive.

Insert your Windows 9x or 2x CD-ROM and it *should* automatically give you the option to reinstall.

Hope this helps.

by earnest

Recently had same problem after adding a webaccerlator and deinstalling it. It caused a problem accessing my any site on the web. The more I tried the worse windows got. After reloading I started to get explorer failures.I would take an exception error at same place during reload because of a corrupted registry that carried itself over to the reinstall. I wound up loading bootlog.txt from f8 on boot. I found out what app/dll that was corrupted, manually reloaded it and to kill the whole cow dida scanreg /restore. I had one that was not too old and it put my pc back to where it was working. I lost all changes to desktop since the backup, but it was not hard to recover. I now do a backup every time I boot so I will not have a registry problem snap me in the a@@ again, I hope anyway. Hope this info helps.
Bo

by jeffryg

Well, recently alot of results have been coming from this little tip. A majority of the invalid page faults are in direct relation to your VXD files (virtual display drivers). Try to remove the video card & replace with back up card if possible. Installing a different card will clear the current setting within the system. Boot up, set up new card and then shutdown & insert the original video card. When booting up make sure to check out the system BIOS, make sure the setting are correct for the video device. Of course check for updates on all the programs, explorer, windows, etc.
Hope fully this will work

by thenetworker

First thing first.
If it is Windows 98:
I would boot to a dos prompt (hit f8 when it says "starting windows 98", just before the widows logo screen. Choose command prompt only). Then type scanreg. Let it scan, and choose view backups. Select a backup from a date that it worked, and restore it.

If it is win95, or the above did not work. Boot to a dos prompt, edit system.ini, and where it says "display.drv=pnp(whatever)" change it to "display.drv=vga.drv". You can also do this in safe mode by changing the display adapter to "standard vga"

Reboot.
Good Luck.
- Mike Scott
http://godofdata.tripod.com

by kgosnell

There appears to be a broad issue with a viewer in 2000 and ME , a much smaller problem with 98 , but an issue all the same , check Fred Langas page (Langa List) for the upcomming fix (I hope) , I made him aware of the trend across the platforms, asit appears to be the viewer program for text , in 5.5 , but it may be the edge of a larger bug that needs to be addressed in the Explorer , in the meantime while you tinker around with various fixes , start the dialer for the ISP and cancell beforeit connects , (this clears the cache) and then redial again and likely it will go , if it hangs while in the progrm, break the connection and redial to resolve it, sorry I don't have a magic fix , but the problem is as varied as the users. Luck

by ivand

Thanks for the tips. For a while that seemed to be the only fix by canceling the dialer in the middle of it dialing and clicking ok the the error message while doing that.

I was able to fix it on my windows98. This is what I found:
After daysand hours of troubleshooting I finally decided to reinstall windows in another directory, actually renaming the old dir to windows.old and put a fresh copy in c:\windows. After this, I slowly started adding all my applications and drivers that were necessary for my PC.
I had to reload the Modem S/W. Wich is a Motorola SM56 Fax voice modem. When this loads up there is an applet in the control panel that gets created for the modem. Its an applet that gives you properties and the current baud rate for the modem while connected. Usually what I like to do is run a shortcut for the applet in the quick launch area by the taskbar and also one in the Start menu as it scrolls up. So every time I try to access the shortcut or start up windows98, iswhen i get that "explorer caused and invalid page fault in module uknown". Why this happens?
I dont know. Dont know how it relates to the explorer, modem or the dial up features of windows98SE. The only way I can resolve it on my PC is by not loading that modem applet in the shortcut areas of quicklaunch or the start menu.
I hope this helps anyone who is having the same problem.

Ivan

This discussion is closed to new replies.